src/memory.c

Tue, 20 Nov 2012 23:31:03 +0000

author
Philip Pemberton <philpem@philpem.me.uk>
date
Tue, 20 Nov 2012 23:31:03 +0000
changeset 117
73caf968b67b
parent 116
21521e62007f
child 119
101fe02456ce
permissions
-rw-r--r--

show LED state change only if SHOW_LEDS is defined

     1 #include <stdio.h>
     2 #include <stdlib.h>
     3 #include <stdint.h>
     4 #include <stdbool.h>
     5 #include <assert.h>
     6 #include "musashi/m68k.h"
     7 #include "state.h"
     8 #include "utils.h"
     9 #include "memory.h"
    11 /******************
    12  * Memory mapping
    13  ******************/
    15 #define MAPRAM(addr) (((uint16_t)state.map[addr*2] << 8) + ((uint16_t)state.map[(addr*2)+1]))
    17 uint32_t mapAddr(uint32_t addr, bool writing)/*{{{*/
    18 {
    19 	if (addr < 0x400000) {
    20 		// RAM access. Check against the Map RAM
    21 		// Start by getting the original page address
    22 		uint16_t page = (addr >> 12) & 0x3FF;
    24 		// Look it up in the map RAM and get the physical page address
    25 		uint32_t new_page_addr = MAPRAM(page) & 0x3FF;
    27 		// Update the Page Status bits
    28 		uint8_t pagebits = (MAPRAM(page) >> 13) & 0x03;
    29 		// Pagebits --
    30 		//   0 = not present
    31 		//   1 = present but not accessed
    32 		//   2 = present, accessed (read from)
    33 		//   3 = present, dirty (written to)
    34 		switch (pagebits) {
    35 			case 0:
    36 				// Page not present
    37 				// This should cause a page fault
    38 				LOGS("Whoa! Pagebit update, when the page is not present!");
    39 				break;
    41 			case 1:
    42 				// Page present -- first access
    43 				state.map[page*2] &= 0x9F;	// turn off "present" bit (but not write enable!)
    44 				if (writing)
    45 					state.map[page*2] |= 0x60;		// Page written to (dirty)
    46 				else
    47 					state.map[page*2] |= 0x40;		// Page accessed but not written
    48 				break;
    50 			case 2:
    51 			case 3:
    52 				// Page present, 2nd or later access
    53 				if (writing)
    54 					state.map[page*2] |= 0x60;		// Page written to (dirty)
    55 				break;
    56 		}
    58 		// Return the address with the new physical page spliced in
    59 		return (new_page_addr << 12) + (addr & 0xFFF);
    60 	} else {
    61 		// I/O, VRAM or MapRAM space; no mapping is performed or required
    62 		// TODO: assert here?
    63 		return addr;
    64 	}
    65 }/*}}}*/
    67 MEM_STATUS checkMemoryAccess(uint32_t addr, bool writing)/*{{{*/
    68 {
    69 	// Get the page bits for this page.
    70 	uint16_t page = (addr >> 12) & 0x3FF;
    71 	uint8_t pagebits = (MAPRAM(page) >> 13) & 0x07;
    73 	// Check page is present (but only for RAM zone)
    74 	if ((addr < 0x400000) && ((pagebits & 0x03) == 0)) {
    75 		LOG("Page not mapped in: addr %08X, page %04X, mapbits %04X", addr, page, MAPRAM(page));
    76 		return MEM_PAGEFAULT;
    77 	}
    79 	// Are we in Supervisor mode?
    80 	if (m68k_get_reg(NULL, M68K_REG_SR) & 0x2000)
    81 		// Yes. We can do anything we like.
    82 		return MEM_ALLOWED;
    84 	// If we're here, then we must be in User mode.
    85 	// Check that the user didn't access memory outside of the RAM area
    86 	if (addr >= 0x400000) {
    87 		LOGS("User accessed privileged memory");
    88 		return MEM_UIE;
    89 	}
    91 	// User attempt to access the kernel
    92 	// A19, A20, A21, A22 low (kernel access): RAM addr before paging; not in Supervisor mode
    93 	if (((addr >> 19) & 0x0F) == 0) {
    94 		LOGS("Attempt by user code to access kernel space");
    95 		return MEM_KERNEL;
    96 	}
    98 	// Check page is write enabled
    99 	if (writing && ((pagebits & 0x04) == 0)) {
   100 		LOG("Page not write enabled: inaddr %08X, page %04X, mapram %04X [%02X %02X], pagebits %d",
   101 				addr, page, MAPRAM(page), state.map[page*2], state.map[(page*2)+1], pagebits);
   102 		return MEM_PAGE_NO_WE;
   103 	}
   105 	// Page access allowed.
   106 	return MEM_ALLOWED;
   107 }/*}}}*/
   109 #undef MAPRAM
   112 /********************************************************
   113  * m68k memory read/write support functions for Musashi
   114  ********************************************************/
   116 /**
   117  * @brief	Check memory access permissions for a write operation.
   118  * @note	This used to be a single macro (merged with ACCESS_CHECK_RD), but
   119  * 			gcc throws warnings when you have a return-with-value in a void
   120  * 			function, even if the return-with-value is completely unreachable.
   121  * 			Similarly it doesn't like it if you have a return without a value
   122  * 			in a non-void function, even if it's impossible to ever reach the
   123  * 			return-with-no-value. UGH!
   124  */
   125 /*{{{ macro: ACCESS_CHECK_WR(address, bits)*/
   126 #define ACCESS_CHECK_WR(address, bits)								\
   127 	do {															\
   128 		bool fault = false;											\
   129 		MEM_STATUS st;												\
   130 		switch (st = checkMemoryAccess(address, true)) {			\
   131 			case MEM_ALLOWED:										\
   132 				/* Access allowed */								\
   133 				break;												\
   134 			case MEM_PAGEFAULT:										\
   135 				/* Page fault */									\
   136 				state.genstat = 0x8BFF | (state.pie ? 0x0400 : 0);	\
   137 				fault = true;										\
   138 				break;												\
   139 			case MEM_UIE:											\
   140 				/* User access to memory above 4MB */				\
   141 				state.genstat = 0x9AFF | (state.pie ? 0x0400 : 0);	\
   142 				fault = true;										\
   143 				break;												\
   144 			case MEM_KERNEL:										\
   145 			case MEM_PAGE_NO_WE:									\
   146 				/* kernel access or page not write enabled */		\
   147 				/* XXX: is this the correct value? */				\
   148 				state.genstat = 0x9BFF | (state.pie ? 0x0400 : 0);	\
   149 				fault = true;										\
   150 				break;												\
   151 		}															\
   152 																	\
   153 		if (fault) {												\
   154 			if (bits >= 16)											\
   155 				state.bsr0 = 0x7C00;								\
   156 			else													\
   157 				state.bsr0 = (address & 1) ? 0x7E00 : 0x7D00;		\
   158 			state.bsr0 |= (address >> 16);							\
   159 			state.bsr1 = address & 0xffff;							\
   160 			LOG("Bus Error while writing, addr %08X, statcode %d", address, st);		\
   161 			if (state.ee) m68k_pulse_bus_error();					\
   162 			return;													\
   163 		}															\
   164 	} while (0)
   165 /*}}}*/
   167 /**
   168  * @brief Check memory access permissions for a read operation.
   169  * @note	This used to be a single macro (merged with ACCESS_CHECK_WR), but
   170  * 			gcc throws warnings when you have a return-with-value in a void
   171  * 			function, even if the return-with-value is completely unreachable.
   172  * 			Similarly it doesn't like it if you have a return without a value
   173  * 			in a non-void function, even if it's impossible to ever reach the
   174  * 			return-with-no-value. UGH!
   175  */
   176 /*{{{ macro: ACCESS_CHECK_RD(address, bits)*/
   177 #define ACCESS_CHECK_RD(address, bits)								\
   178 	do {															\
   179 		bool fault = false;											\
   180 		MEM_STATUS st;												\
   181 		switch (st = checkMemoryAccess(address, false)) {			\
   182 			case MEM_ALLOWED:										\
   183 				/* Access allowed */								\
   184 				break;												\
   185 			case MEM_PAGEFAULT:										\
   186 				/* Page fault */									\
   187 				state.genstat = 0xCBFF | (state.pie ? 0x0400 : 0);	\
   188 				fault = true;										\
   189 				break;												\
   190 			case MEM_UIE:											\
   191 				/* User access to memory above 4MB */				\
   192 				state.genstat = 0xDAFF | (state.pie ? 0x0400 : 0);	\
   193 				fault = true;										\
   194 				break;												\
   195 			case MEM_KERNEL:										\
   196 			case MEM_PAGE_NO_WE:									\
   197 				/* kernel access or page not write enabled */		\
   198 				/* XXX: is this the correct value? */				\
   199 				state.genstat = 0xDBFF | (state.pie ? 0x0400 : 0);	\
   200 				fault = true;										\
   201 				break;												\
   202 		}															\
   203 																	\
   204 		if (fault) {												\
   205 			if (bits >= 16)											\
   206 				state.bsr0 = 0x7C00;								\
   207 			else													\
   208 				state.bsr0 = (address & 1) ? 0x7E00 : 0x7D00;		\
   209 			state.bsr0 |= (address >> 16);							\
   210 			state.bsr1 = address & 0xffff;							\
   211 			LOG("Bus Error while reading, addr %08X, statcode %d", address, st);		\
   212 			if (state.ee) m68k_pulse_bus_error();					\
   213 			if (bits == 32)											\
   214 				return 0xFFFFFFFF;									\
   215 			else													\
   216 				return (1UL << bits)-1;								\
   217 		}															\
   218 	} while (0)
   219 /*}}}*/
   221 bool access_check_dma(int reading)
   222 {
   223 	// Check memory access permissions
   224 	bool access_ok;
   225 	switch (checkMemoryAccess(state.dma_address, !reading)) {
   226 		case MEM_PAGEFAULT:
   227 			// Page fault
   228 			state.genstat = 0xABFF
   229 				| (reading ? 0x4000 : 0)
   230 				| (state.pie ? 0x0400 : 0);
   231 			access_ok = false;
   232 			break;
   234 		case MEM_UIE:
   235 			// User access to memory above 4MB
   236 			// FIXME? Shouldn't be possible with DMA... assert this?
   237 			state.genstat = 0xBAFF
   238 				| (reading ? 0x4000 : 0)
   239 				| (state.pie ? 0x0400 : 0);
   240 			access_ok = false;
   241 			break;
   243 		case MEM_KERNEL:
   244 		case MEM_PAGE_NO_WE:
   245 			// Kernel access or page not write enabled
   246 			/* XXX: is this correct? */
   247 			state.genstat = 0xBBFF
   248 				| (reading ? 0x4000 : 0)
   249 				| (state.pie ? 0x0400 : 0);
   250 			access_ok = false;
   251 			break;
   253 		case MEM_ALLOWED:
   254 			access_ok = true;
   255 			break;
   256 	}
   257 	if (!access_ok) {
   258 		state.bsr0 = 0x3C00;
   259 		state.bsr0 |= (state.dma_address >> 16);
   260 		state.bsr1 = state.dma_address & 0xffff;
   261 		if (state.ee) m68k_set_irq(7);
   262 		printf("BUS ERROR FROM DMA: genstat=%04X, bsr0=%04X, bsr1=%04X\n", state.genstat, state.bsr0, state.bsr1);
   263 	}
   264 	return (access_ok);
   265 }
   267 // Logging macros
   268 #define LOG_NOT_HANDLED_R(bits)															\
   269 	if (!handled) printf("unhandled read%02d, addr=0x%08X\n", bits, address);
   271 #define LOG_NOT_HANDLED_W(bits)															\
   272 	if (!handled) printf("unhandled write%02d, addr=0x%08X, data=0x%08X\n", bits, address, data);
   274 /********************************************************
   275  * I/O read/write functions
   276  ********************************************************/
   278 /**
   279  * Issue a warning if a read operation is made with an invalid size
   280  */
   281 inline static void ENFORCE_SIZE(int bits, uint32_t address, bool read, int allowed, char *regname)
   282 {
   283 	assert((bits == 8) || (bits == 16) || (bits == 32));
   284 	if ((bits & allowed) == 0) {
   285 		printf("WARNING: %s 0x%08X (%s) with invalid size %d!\n", read ? "read from" : "write to", address, regname, bits);
   286 	}
   287 }
   289 inline static void ENFORCE_SIZE_R(int bits, uint32_t address, int allowed, char *regname)
   290 {
   291 	ENFORCE_SIZE(bits, address, true, allowed, regname);
   292 }
   294 inline static void ENFORCE_SIZE_W(int bits, uint32_t address, int allowed, char *regname)
   295 {
   296 	ENFORCE_SIZE(bits, address, false, allowed, regname);
   297 }
   299 void IoWrite(uint32_t address, uint32_t data, int bits)/*{{{*/
   300 {
   301 	bool handled = false;
   303 	if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   304 		// I/O register space, zone A
   305 		switch (address & 0x0F0000) {
   306 			case 0x010000:				// General Status Register
   307 				if (bits == 16)
   308 					state.genstat = (data & 0xffff);
   309 				else if (bits == 8) {
   310 					if (address & 0)
   311 						state.genstat = data;
   312 					else
   313 						state.genstat = data << 8;
   314 				}
   315 				handled = true;
   316 				break;
   317 			case 0x030000:				// Bus Status Register 0
   318 				break;
   319 			case 0x040000:				// Bus Status Register 1
   320 				break;
   321 			case 0x050000:				// Phone status
   322 				break;
   323 			case 0x060000:				// DMA Count
   324 				ENFORCE_SIZE_W(bits, address, 16, "DMACOUNT");
   325 				state.dma_count = (data & 0x3FFF);
   326 				state.idmarw = ((data & 0x4000) == 0x4000);
   327 				state.dmaen = ((data & 0x8000) == 0x8000);
   328 				// This handles the "dummy DMA transfer" mentioned in the docs
   329 				// disabled because it causes the floppy test to fail
   330 #if 0
   331 				if (!state.idmarw){
   332 					if (access_check_dma(true)){
   333 						uint32_t newAddr = mapAddr(state.dma_address, true);
   334 						// RAM access
   335 						if (newAddr <= 0x1fffff)
   336 							WR16(state.base_ram, newAddr, state.base_ram_size - 1, 0xFF);
   337 						else if (address <= 0x3FFFFF)
   338 							WR16(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1, 0xFF);
   339 					}
   340 				}
   341 #endif
   342 				state.dma_count++;
   343 				handled = true;
   344 				break;
   345 			case 0x070000:				// Line Printer Status Register
   346 				break;
   347 			case 0x080000:				// Real Time Clock
   348 				break;
   349 			case 0x090000:				// Phone registers
   350 				switch (address & 0x0FF000) {
   351 					case 0x090000:		// Handset relay
   352 					case 0x098000:
   353 						break;
   354 					case 0x091000:		// Line select 2
   355 					case 0x099000:
   356 						break;
   357 					case 0x092000:		// Hook relay 1
   358 					case 0x09A000:
   359 						break;
   360 					case 0x093000:		// Hook relay 2
   361 					case 0x09B000:
   362 						break;
   363 					case 0x094000:		// Line 1 hold
   364 					case 0x09C000:
   365 						break;
   366 					case 0x095000:		// Line 2 hold
   367 					case 0x09D000:
   368 						break;
   369 					case 0x096000:		// Line 1 A-lead
   370 					case 0x09E000:
   371 						break;
   372 					case 0x097000:		// Line 2 A-lead
   373 					case 0x09F000:
   374 						break;
   375 				}
   376 				break;
   377 			case 0x0A0000:				// Miscellaneous Control Register
   378 				ENFORCE_SIZE_W(bits, address, 16, "MISCCON");
   379 				// TODO: handle the ctrl bits properly
   380 				if (data & 0x8000){
   381 					state.timer_enabled = 1;
   382 				}else{
   383 					state.timer_enabled = 0;
   384 					state.timer_asserted = 0;
   385 				}
   386 				state.dma_reading = (data & 0x4000);
   387 				if (state.leds != ((~data & 0xF00) >> 8)) {
   388 					state.leds = (~data & 0xF00) >> 8;
   389 #ifdef SHOW_LEDS
   390 					printf("LEDs: %s %s %s %s\n",
   391 							(state.leds & 8) ? "R" : "-",
   392 							(state.leds & 4) ? "G" : "-",
   393 							(state.leds & 2) ? "Y" : "-",
   394 							(state.leds & 1) ? "R" : "-");
   395 #endif
   396 				}
   397 				handled = true;
   398 				break;
   399 			case 0x0B0000:				// TM/DIALWR
   400 				break;
   401 			case 0x0C0000:				// Clear Status Register
   402 				state.genstat = 0xFFFF;
   403 				state.bsr0 = 0xFFFF;
   404 				state.bsr1 = 0xFFFF;
   405 				handled = true;
   406 				break;
   407 			case 0x0D0000:				// DMA Address Register
   408 				if (address & 0x004000) {
   409 					// A14 high -- set most significant bits
   410 					state.dma_address = (state.dma_address & 0x1fe) | ((address & 0x3ffe) << 8);
   411 				} else {
   412 					// A14 low -- set least significant bits
   413 					state.dma_address = (state.dma_address & 0x3ffe00) | (address & 0x1fe);
   414 				}
   415 				handled = true;
   416 				break;
   417 			case 0x0E0000:				// Disk Control Register
   418 				{
   419 					bool fd_selected;
   420 					bool hd_selected;
   421 					ENFORCE_SIZE_W(bits, address, 16, "DISKCON");
   422 					// B7 = FDD controller reset
   423 					if ((data & 0x80) == 0) wd2797_reset(&state.fdc_ctx);
   424 					// B6 = drive 0 select
   425 					fd_selected = (data & 0x40) != 0;
   426 					// B5 = motor enable -- TODO
   427 					// B4 = HDD controller reset
   428 					if ((data & 0x10) == 0) wd2010_reset(&state.hdc_ctx);
   429 					// B3 = HDD0 select
   430 					hd_selected = (data & 0x08) != 0;
   431 					// B2,1,0 = HDD0 head select -- TODO?
   432 					if (hd_selected && !state.hd_selected){
   433 						state.fd_selected = false;
   434 						state.hd_selected = true;
   435 					}else if (fd_selected && !state.fd_selected){
   436 						state.hd_selected = false;
   437 						state.fd_selected = true;
   438 					}
   439 					handled = true;
   440 					break;
   441 				}
   442 			case 0x0F0000:				// Line Printer Data Register
   443 				break;
   444 		}
   445 	} else if ((address >= 0xC00000) && (address <= 0xFFFFFF)) {
   446 		// I/O register space, zone B
   447 		switch (address & 0xF00000) {
   448 			case 0xC00000:				// Expansion slots
   449 			case 0xD00000:
   450 				switch (address & 0xFC0000) {
   451 					case 0xC00000:		// Expansion slot 0
   452 					case 0xC40000:		// Expansion slot 1
   453 					case 0xC80000:		// Expansion slot 2
   454 					case 0xCC0000:		// Expansion slot 3
   455 					case 0xD00000:		// Expansion slot 4
   456 					case 0xD40000:		// Expansion slot 5
   457 					case 0xD80000:		// Expansion slot 6
   458 					case 0xDC0000:		// Expansion slot 7
   459 						fprintf(stderr, "NOTE: WR%d to expansion card space, addr=0x%08X, data=0x%08X\n", bits, address, data);
   460 						handled = true;
   461 						break;
   462 				}
   463 				break;
   464 			case 0xE00000:				// HDC, FDC, MCR2 and RTC data bits
   465 			case 0xF00000:
   466 				switch (address & 0x070000) {
   467 					case 0x000000:		// [ef][08]xxxx ==> WD2010 hard disc controller
   468 						wd2010_write_reg(&state.hdc_ctx, (address >> 1) & 7, data);
   469 						handled = true;
   470 						break;
   471 					case 0x010000:		// [ef][19]xxxx ==> WD2797 floppy disc controller
   472 						/*ENFORCE_SIZE_W(bits, address, 16, "FDC REGISTERS");*/
   473 						wd2797_write_reg(&state.fdc_ctx, (address >> 1) & 3, data);
   474 						handled = true;
   475 						break;
   476 					case 0x020000:		// [ef][2a]xxxx ==> Miscellaneous Control Register 2
   477 						// MCR2 - UNIX PC Rev. P5.1 HDD head select b3 and potential HDD#2 select
   478 						wd2010_write_reg(&state.hdc_ctx, UNIXPC_REG_MCR2, data);
   479 						handled = true;
   480 						break;
   481 					case 0x030000:		// [ef][3b]xxxx ==> Real Time Clock data bits
   482 						break;
   483 					case 0x040000:		// [ef][4c]xxxx ==> General Control Register
   484 						switch (address & 0x077000) {
   485 							case 0x040000:		// [ef][4c][08]xxx ==> EE
   486 								// Error Enable. If =0, Level7 intrs and bus errors are masked.
   487 								ENFORCE_SIZE_W(bits, address, 16, "EE");
   488 								state.ee = ((data & 0x8000) == 0x8000);
   489 								handled = true;
   490 								break;
   491 							case 0x041000:		// [ef][4c][19]xxx ==> PIE
   492 								ENFORCE_SIZE_W(bits, address, 16, "PIE");
   493 								state.pie = ((data & 0x8000) == 0x8000);
   494 								handled = true;
   495 								break;
   496 							case 0x042000:		// [ef][4c][2A]xxx ==> BP
   497 								break;
   498 							case 0x043000:		// [ef][4c][3B]xxx ==> ROMLMAP
   499 								ENFORCE_SIZE_W(bits, address, 16, "ROMLMAP");
   500 								state.romlmap = ((data & 0x8000) == 0x8000);
   501 								handled = true;
   502 								break;
   503 							case 0x044000:		// [ef][4c][4C]xxx ==> L1 MODEM
   504 								ENFORCE_SIZE_W(bits, address, 16, "L1 MODEM");
   505 								break;
   506 							case 0x045000:		// [ef][4c][5D]xxx ==> L2 MODEM
   507 								ENFORCE_SIZE_W(bits, address, 16, "L2 MODEM");
   508 								break;
   509 							case 0x046000:		// [ef][4c][6E]xxx ==> D/N CONNECT
   510 								ENFORCE_SIZE_W(bits, address, 16, "D/N CONNECT");
   511 								break;
   512 							case 0x047000:		// [ef][4c][7F]xxx ==> Whole screen reverse video
   513 								ENFORCE_SIZE_W(bits, address, 16, "WHOLE SCREEN REVERSE VIDEO");
   514 								break;
   515 						}
   516 					case 0x050000:		// [ef][5d]xxxx ==> 8274
   517 						break;
   518 					case 0x060000:		// [ef][6e]xxxx ==> Control regs
   519 						switch (address & 0x07F000) {
   520 							default:
   521 								break;
   522 						}
   523 						break;
   524 					case 0x070000:		// [ef][7f]xxxx ==> 6850 Keyboard Controller
   525 						// TODO: figure out which sizes are valid (probably just 8 and 16)
   526 						// ENFORCE_SIZE_W(bits, address, 16, "KEYBOARD CONTROLLER");
   527 						if (bits == 8) {
   528 							printf("KBD WR %02X => %02X\n", (address >> 1) & 3, data);
   529 							keyboard_write(&state.kbd, (address >> 1) & 3, data);
   530 							handled = true;
   531 						} else if (bits == 16) {
   532 							printf("KBD WR %02X => %04X\n", (address >> 1) & 3, data);
   533 							keyboard_write(&state.kbd, (address >> 1) & 3, data >> 8);
   534 							handled = true;
   535 						}
   536 						break;
   537 				}
   538 		}
   539 	}
   541 	LOG_NOT_HANDLED_W(bits);
   542 }/*}}}*/
   544 uint32_t IoRead(uint32_t address, int bits)/*{{{*/
   545 {
   546 	bool handled = false;
   547 	uint32_t data = 0xFFFFFFFF;
   549 	if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   550 		// I/O register space, zone A
   551 		switch (address & 0x0F0000) {
   552 			case 0x010000:				// General Status Register
   553 				/* ENFORCE_SIZE_R(bits, address, 16, "GENSTAT"); */
   554 				if (bits == 32) {
   555 					return ((uint32_t)state.genstat << 16) + (uint32_t)state.genstat;
   556 				} else if (bits == 16) {
   557 					return (uint16_t)state.genstat;
   558 				} else {
   559 					return (uint8_t)(state.genstat & 0xff);
   560 				}
   561 				break;
   562 			case 0x030000:				// Bus Status Register 0
   563 				ENFORCE_SIZE_R(bits, address, 16, "BSR0");
   564 				return ((uint32_t)state.bsr0 << 16) + (uint32_t)state.bsr0;
   565 				break;
   566 			case 0x040000:				// Bus Status Register 1
   567 				ENFORCE_SIZE_R(bits, address, 16, "BSR1");
   568 				return ((uint32_t)state.bsr1 << 16) + (uint32_t)state.bsr1;
   569 				break;
   570 			case 0x050000:				// Phone status
   571 				ENFORCE_SIZE_R(bits, address, 8 | 16, "PHONE STATUS");
   572 				break;
   573 			case 0x060000:				// DMA Count
   574 				// TODO: U/OERR- is always inactive (bit set)... or should it be = DMAEN+?
   575 				// Bit 14 is always unused, so leave it set
   576 				ENFORCE_SIZE_R(bits, address, 16, "DMACOUNT");
   577 				return (state.dma_count & 0x3fff) | 0xC000;
   578 				break;
   579 			case 0x070000:				// Line Printer Status Register
   580 				data = 0x00120012;	// no parity error, no line printer error, no irqs from FDD or HDD
   581 				data |= wd2797_get_irq(&state.fdc_ctx) ? 0x00080008 : 0;
   582 				data |= wd2010_get_irq(&state.hdc_ctx) ? 0x00040004 : 0;
   583 				return data;
   584 				break;
   585 			case 0x080000:				// Real Time Clock
   586 				printf("READ NOTIMP: Realtime Clock\n");
   587 				break;
   588 			case 0x090000:				// Phone registers
   589 				switch (address & 0x0FF000) {
   590 					case 0x090000:		// Handset relay
   591 					case 0x098000:
   592 						break;
   593 					case 0x091000:		// Line select 2
   594 					case 0x099000:
   595 						break;
   596 					case 0x092000:		// Hook relay 1
   597 					case 0x09A000:
   598 						break;
   599 					case 0x093000:		// Hook relay 2
   600 					case 0x09B000:
   601 						break;
   602 					case 0x094000:		// Line 1 hold
   603 					case 0x09C000:
   604 						break;
   605 					case 0x095000:		// Line 2 hold
   606 					case 0x09D000:
   607 						break;
   608 					case 0x096000:		// Line 1 A-lead
   609 					case 0x09E000:
   610 						break;
   611 					case 0x097000:		// Line 2 A-lead
   612 					case 0x09F000:
   613 						break;
   614 				}
   615 				break;
   616 			case 0x0A0000:				// Miscellaneous Control Register -- write only!
   617 				handled = true;
   618 				break;
   619 			case 0x0B0000:				// TM/DIALWR
   620 				break;
   621 			case 0x0C0000:				// Clear Status Register -- write only!
   622 				handled = true;
   623 				break;
   624 			case 0x0D0000:				// DMA Address Register
   625 				break;
   626 			case 0x0E0000:				// Disk Control Register
   627 				break;
   628 			case 0x0F0000:				// Line Printer Data Register
   629 				break;
   630 		}
   631 	} else if ((address >= 0xC00000) && (address <= 0xFFFFFF)) {
   632 		// I/O register space, zone B
   633 		switch (address & 0xF00000) {
   634 			case 0xC00000:				// Expansion slots
   635 			case 0xD00000:
   636 				switch (address & 0xFC0000) {
   637 					case 0xC00000:		// Expansion slot 0
   638 					case 0xC40000:		// Expansion slot 1
   639 					case 0xC80000:		// Expansion slot 2
   640 					case 0xCC0000:		// Expansion slot 3
   641 					case 0xD00000:		// Expansion slot 4
   642 					case 0xD40000:		// Expansion slot 5
   643 					case 0xD80000:		// Expansion slot 6
   644 					case 0xDC0000:		// Expansion slot 7
   645 						fprintf(stderr, "NOTE: RD%d from expansion card space, addr=0x%08X\n", bits, address);
   646 						handled = true;
   647 						break;
   648 				}
   649 				break;
   650 			case 0xE00000:				// HDC, FDC, MCR2 and RTC data bits
   651 			case 0xF00000:
   652 				switch (address & 0x070000) {
   653 					case 0x000000:		// [ef][08]xxxx ==> WD1010 hard disc controller
   654 						return (wd2010_read_reg(&state.hdc_ctx, (address >> 1) & 7));
   656 						break;
   657 					case 0x010000:		// [ef][19]xxxx ==> WD2797 floppy disc controller
   658 						/*ENFORCE_SIZE_R(bits, address, 16, "FDC REGISTERS");*/
   659 						return wd2797_read_reg(&state.fdc_ctx, (address >> 1) & 3);
   660 						break;
   661 					case 0x020000:		// [ef][2a]xxxx ==> Miscellaneous Control Register 2
   662 						break;
   663 					case 0x030000:		// [ef][3b]xxxx ==> Real Time Clock data bits
   664 						break;
   665 					case 0x040000:		// [ef][4c]xxxx ==> General Control Register
   666 						switch (address & 0x077000) {
   667 							case 0x040000:		// [ef][4c][08]xxx ==> EE
   668 							case 0x041000:		// [ef][4c][19]xxx ==> PIE
   669 							case 0x042000:		// [ef][4c][2A]xxx ==> BP
   670 							case 0x043000:		// [ef][4c][3B]xxx ==> ROMLMAP
   671 							case 0x044000:		// [ef][4c][4C]xxx ==> L1 MODEM
   672 							case 0x045000:		// [ef][4c][5D]xxx ==> L2 MODEM
   673 							case 0x046000:		// [ef][4c][6E]xxx ==> D/N CONNECT
   674 								// All write-only registers... TODO: bus error?
   675 								handled = true;
   676 								break;
   677 							case 0x047000:		// [ef][4c][7F]xxx ==> Whole screen reverse video [FIXME: not in TRM]
   678 								break;
   679 						}
   680 						break;
   681 					case 0x050000:		// [ef][5d]xxxx ==> 8274
   682 						break;
   683 					case 0x060000:		// [ef][6e]xxxx ==> Control regs
   684 						switch (address & 0x07F000) {
   685 							default:
   686 								break;
   687 						}
   688 						break;
   689 					case 0x070000:		// [ef][7f]xxxx ==> 6850 Keyboard Controller
   690 						// TODO: figure out which sizes are valid (probably just 8 and 16)
   691 						//ENFORCE_SIZE_R(bits, address, 16, "KEYBOARD CONTROLLER");
   692 						{
   693 							if (bits == 8) {
   694 								return keyboard_read(&state.kbd, (address >> 1) & 3);
   695 							} else {
   696 								return keyboard_read(&state.kbd, (address >> 1) & 3) << 8;
   697 							}
   698 							return data;
   699 						}
   700 						break;
   701 				}
   702 		}
   703 	}
   705 	LOG_NOT_HANDLED_R(bits);
   707 	return data;
   708 }/*}}}*/
   711 /********************************************************
   712  * m68k memory read/write support functions for Musashi
   713  ********************************************************/
   715 /**
   716  * @brief Read M68K memory, 32-bit
   717  */
   718 uint32_t m68k_read_memory_32(uint32_t address)/*{{{*/
   719 {
   720 	uint32_t data = 0xFFFFFFFF;
   722 	// If ROMLMAP is set, force system to access ROM
   723 	if (!state.romlmap)
   724 		address |= 0x800000;
   726 	// Check access permissions
   727 	ACCESS_CHECK_RD(address, 32);
   729 	if ((address >= 0x800000) && (address <= 0xBFFFFF)) {
   730 		// ROM access
   731 		return RD32(state.rom, address, ROM_SIZE - 1);
   732 	} else if (address <= 0x3fffff) {
   733 		// RAM access
   734 		uint32_t newAddr = mapAddr(address, false);
   735 		if (newAddr <= 0x1fffff) {
   736 			return RD32(state.base_ram, newAddr, state.base_ram_size - 1);
   737 		} else {
   738 			if (newAddr <= (state.exp_ram_size + 0x200000 - 1))
   739 				return RD32(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1);
   740 			else
   741 				return 0xffffffff;
   742 		}
   743 	} else if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   744 		// I/O register space, zone A
   745 		switch (address & 0x0F0000) {
   746 			case 0x000000:				// Map RAM access
   747 				if (address > 0x4007FF) fprintf(stderr, "NOTE: RD32 from MapRAM mirror, addr=0x%08X\n", address);
   748 				return RD32(state.map, address, 0x7FF);
   749 				break;
   750 			case 0x020000:				// Video RAM
   751 				if (address > 0x427FFF) fprintf(stderr, "NOTE: RD32 from VideoRAM mirror, addr=0x%08X\n", address);
   752 				return RD32(state.vram, address, 0x7FFF);
   753 				break;
   754 			default:
   755 				return IoRead(address, 32);
   756 		}
   757 	} else {
   758 		return IoRead(address, 32);
   759 	}
   761 	return data;
   762 }/*}}}*/
   764 /**
   765  * @brief Read M68K memory, 16-bit
   766  */
   767 uint32_t m68k_read_memory_16(uint32_t address)/*{{{*/
   768 {
   769 	uint16_t data = 0xFFFF;
   771 	// If ROMLMAP is set, force system to access ROM
   772 	if (!state.romlmap)
   773 		address |= 0x800000;
   775 	// Check access permissions
   776 	ACCESS_CHECK_RD(address, 16);
   778 	if ((address >= 0x800000) && (address <= 0xBFFFFF)) {
   779 		// ROM access
   780 		data = RD16(state.rom, address, ROM_SIZE - 1);
   781 	} else if (address <= 0x3fffff) {
   782 		// RAM access
   783 		uint32_t newAddr = mapAddr(address, false);
   784 		if (newAddr <= 0x1fffff) {
   785 			return RD16(state.base_ram, newAddr, state.base_ram_size - 1);
   786 		} else {
   787 			if (newAddr <= (state.exp_ram_size + 0x200000 - 1))
   788 				return RD16(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1);
   789 			else
   790 				return 0xffff;
   791 		}
   792 	} else if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   793 		// I/O register space, zone A
   794 		switch (address & 0x0F0000) {
   795 			case 0x000000:				// Map RAM access
   796 				if (address > 0x4007FF) fprintf(stderr, "NOTE: RD16 from MapRAM mirror, addr=0x%08X\n", address);
   797 				data = RD16(state.map, address, 0x7FF);
   798 				break;
   799 			case 0x020000:				// Video RAM
   800 				if (address > 0x427FFF) fprintf(stderr, "NOTE: RD16 from VideoRAM mirror, addr=0x%08X\n", address);
   801 				data = RD16(state.vram, address, 0x7FFF);
   802 				break;
   803 			default:
   804 				data = IoRead(address, 16);
   805 		}
   806 	} else {
   807 		data = IoRead(address, 16);
   808 	}
   810 	return data;
   811 }/*}}}*/
   813 /**
   814  * @brief Read M68K memory, 8-bit
   815  */
   816 uint32_t m68k_read_memory_8(uint32_t address)/*{{{*/
   817 {
   818 	uint8_t data = 0xFF;
   820 	// If ROMLMAP is set, force system to access ROM
   821 	if (!state.romlmap)
   822 		address |= 0x800000;
   824 	// Check access permissions
   825 	ACCESS_CHECK_RD(address, 8);
   827 	if ((address >= 0x800000) && (address <= 0xBFFFFF)) {
   828 		// ROM access
   829 		data = RD8(state.rom, address, ROM_SIZE - 1);
   830 	} else if (address <= 0x3fffff) {
   831 		// RAM access
   832 		uint32_t newAddr = mapAddr(address, false);
   833 		if (newAddr <= 0x1fffff) {
   834 			return RD8(state.base_ram, newAddr, state.base_ram_size - 1);
   835 		} else {
   836 			if (newAddr <= (state.exp_ram_size + 0x200000 - 1))
   837 				return RD8(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1);
   838 			else
   839 				return 0xff;
   840 		}
   841 	} else if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   842 		// I/O register space, zone A
   843 		switch (address & 0x0F0000) {
   844 			case 0x000000:				// Map RAM access
   845 				if (address > 0x4007FF) fprintf(stderr, "NOTE: RD8 from MapRAM mirror, addr=0x%08X\n", address);
   846 				data = RD8(state.map, address, 0x7FF);
   847 				break;
   848 			case 0x020000:				// Video RAM
   849 				if (address > 0x427FFF) fprintf(stderr, "NOTE: RD8 from VideoRAM mirror, addr=0x%08X\n", address);
   850 				data = RD8(state.vram, address, 0x7FFF);
   851 				break;
   852 			default:
   853 				data = IoRead(address, 8);
   854 		}
   855 	} else {
   856 		data = IoRead(address, 8);
   857 	}
   859 	return data;
   860 }/*}}}*/
   862 /**
   863  * @brief Write M68K memory, 32-bit
   864  */
   865 void m68k_write_memory_32(uint32_t address, uint32_t value)/*{{{*/
   866 {
   867 	// If ROMLMAP is set, force system to access ROM
   868 	if (!state.romlmap)
   869 		address |= 0x800000;
   871 	// Check access permissions
   872 	ACCESS_CHECK_WR(address, 32);
   874 	if ((address >= 0x800000) && (address <= 0xBFFFFF)) {
   875 		// ROM access
   876 	} else if (address <= 0x3FFFFF) {
   877 		// RAM access
   878 		uint32_t newAddr = mapAddr(address, true);
   879 		if (newAddr <= 0x1fffff)
   880 			WR32(state.base_ram, newAddr, state.base_ram_size - 1, value);
   881 		else
   882 			WR32(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1, value);
   883 	} else if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   884 		// I/O register space, zone A
   885 		switch (address & 0x0F0000) {
   886 			case 0x000000:				// Map RAM access
   887 				if (address > 0x4007FF) fprintf(stderr, "NOTE: WR32 to MapRAM mirror, addr=0x%08X\n", address);
   888 				WR32(state.map, address, 0x7FF, value);
   889 				break;
   890 			case 0x020000:				// Video RAM
   891 				if (address > 0x427FFF) fprintf(stderr, "NOTE: WR32 to VideoRAM mirror, addr=0x%08X\n", address);
   892 				WR32(state.vram, address, 0x7FFF, value);
   893 				break;
   894 			default:
   895 				IoWrite(address, value, 32);
   896 		}
   897 	} else {
   898 		IoWrite(address, value, 32);
   899 	}
   900 }/*}}}*/
   902 /**
   903  * @brief Write M68K memory, 16-bit
   904  */
   905 void m68k_write_memory_16(uint32_t address, uint32_t value)/*{{{*/
   906 {
   907 	// If ROMLMAP is set, force system to access ROM
   908 	if (!state.romlmap)
   909 		address |= 0x800000;
   911 	// Check access permissions
   912 	ACCESS_CHECK_WR(address, 16);
   914 	if ((address >= 0x800000) && (address <= 0xBFFFFF)) {
   915 		// ROM access
   916 	} else if (address <= 0x3FFFFF) {
   917 		// RAM access
   918 		uint32_t newAddr = mapAddr(address, true);
   920 		if (newAddr <= 0x1fffff)
   921 			WR16(state.base_ram, newAddr, state.base_ram_size - 1, value);
   922 		else
   923 			WR16(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1, value);
   924 	} else if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   925 		// I/O register space, zone A
   926 		switch (address & 0x0F0000) {
   927 			case 0x000000:				// Map RAM access
   928 				if (address > 0x4007FF) fprintf(stderr, "NOTE: WR16 to MapRAM mirror, addr=0x%08X, data=0x%04X\n", address, value);
   929 				WR16(state.map, address, 0x7FF, value);
   930 				break;
   931 			case 0x020000:				// Video RAM
   932 				if (address > 0x427FFF) fprintf(stderr, "NOTE: WR16 to VideoRAM mirror, addr=0x%08X, data=0x%04X\n", address, value);
   933 				WR16(state.vram, address, 0x7FFF, value);
   934 				break;
   935 			default:
   936 				IoWrite(address, value, 16);
   937 		}
   938 	} else {
   939 		IoWrite(address, value, 16);
   940 	}
   941 }/*}}}*/
   943 /**
   944  * @brief Write M68K memory, 8-bit
   945  */
   946 void m68k_write_memory_8(uint32_t address, uint32_t value)/*{{{*/
   947 {
   948 	// If ROMLMAP is set, force system to access ROM
   949 	if (!state.romlmap)
   950 		address |= 0x800000;
   952 	// Check access permissions
   953 	ACCESS_CHECK_WR(address, 8);
   955 	if ((address >= 0x800000) && (address <= 0xBFFFFF)) {
   956 		// ROM access (read only!)
   957 	} else if (address <= 0x3FFFFF) {
   958 		// RAM access
   959 		uint32_t newAddr = mapAddr(address, true);
   960 		if (newAddr <= 0x1fffff)
   961 			WR8(state.base_ram, newAddr, state.base_ram_size - 1, value);
   962 		else
   963 			WR8(state.exp_ram, newAddr - 0x200000, state.exp_ram_size - 1, value);
   964 	} else if ((address >= 0x400000) && (address <= 0x7FFFFF)) {
   965 		// I/O register space, zone A
   966 		switch (address & 0x0F0000) {
   967 			case 0x000000:				// Map RAM access
   968 				if (address > 0x4007FF) fprintf(stderr, "NOTE: WR8 to MapRAM mirror, addr=0x%08X, data=0x%04X\n", address, value);
   969 				WR8(state.map, address, 0x7FF, value);
   970 				break;
   971 			case 0x020000:				// Video RAM
   972 				if (address > 0x427FFF) fprintf(stderr, "NOTE: WR8 to VideoRAM mirror, addr=0x%08X, data=0x%04X\n", address, value);
   973 				WR8(state.vram, address, 0x7FFF, value);
   974 				break;
   975 			default:
   976 				IoWrite(address, value, 8);
   977 		}
   978 	} else {
   979 		IoWrite(address, value, 8);
   980 	}
   981 }/*}}}*/
   984 // for the disassembler
   985 uint32_t m68k_read_disassembler_32(uint32_t addr) { return m68k_read_memory_32(addr); }
   986 uint32_t m68k_read_disassembler_16(uint32_t addr) { return m68k_read_memory_16(addr); }
   987 uint32_t m68k_read_disassembler_8 (uint32_t addr) { return m68k_read_memory_8 (addr); }