3b1emu / annotate

src/state.h@a392eb8f9806 (annotated)

src/state.h

Sat, 17 Nov 2012 19:18:29 +0000

author
Philip Pemberton <philpem@philpem.me.uk>
date
Sat, 17 Nov 2012 19:18:29 +0000
changeset 112
a392eb8f9806
parent 101
e20f02519835
child 142
cfa30b1cd92f
child 151
b63a3999e2e7
permissions
-rw-r--r--

add HDD support + fixes

Patch-Author: Andrew Warkentin <andreww591!gmail>
Patch-Message-ID: <50A772FC.8020009@gmail.com>

I have added floppy write support, full hard disk emulation, and proper handling of DMA page faults to FreeBee. I also fixed the floppy step commands, changed the "force interrupt" floppy command to generate a type 1 status, and changed the DMA address counter to reset to 3fff when a transfer completes (which is what Unix seems to expect - without it, the kernel says that the floppy isn't ready). The floppy, hard disk, and DMA page fault tests all pass. Initializing hard disks and floppies also works (the geometry for both is still fixed by the size of the image, though, and format commands only appear to succeed, but they don't modify the image). Unix still doesn't run, though (it hangs after reading some sectors from the floppy).

philpem@18 1 #ifndef _STATE_H
philpem@18 2 #define _STATE_H
philpem@18 3
philpem@18 4 #include <stddef.h>
philpem@18 5 #include <stdint.h>
philpem@18 6 #include <stdbool.h>
philpem@52 7 #include "wd279x.h"
philpem@112 8 #include "wd2010.h"
philpem@80 9 #include "keyboard.h"
philpem@18 10
philpem@18 11 // Maximum size of the Boot PROMs. Must be a binary power of two.
philpem@18 12 #define ROM_SIZE 32768
philpem@18 13
philpem@18 14 /**
philpem@55 15 * State error codes
philpem@55 16 */
philpem@55 17 typedef enum {
philpem@55 18 STATE_E_OK = 0, ///< Operation succeeded
philpem@55 19 STATE_E_BAD_RAMSIZE = -1, ///< Bad RAM size specified (not a multiple of 512K, or less than 512K)
philpem@55 20 STATE_E_NO_MEMORY = -2, ///< Out of memory while allocating state variables
philpem@55 21 STATE_E_ROM_LOAD_FAIL = -3 ///< Error loading ROMs
philpem@55 22 } STATE_ERR;
philpem@55 23
philpem@55 24 /**
philpem@18 25 * @brief Emulator state storage
philpem@18 26 *
philpem@18 27 * This structure stores the internal state of the emulator.
philpem@18 28 */
philpem@18 29 typedef struct {
philpem@18 30 // Boot PROM can be up to 32Kbytes total size
philpem@18 31 uint8_t rom[ROM_SIZE]; ///< Boot PROM data buffer
philpem@18 32
philpem@52 33 //// Main system RAM
philpem@60 34 uint8_t *base_ram; ///< Base RAM data buffer
philpem@60 35 size_t base_ram_size; ///< Size of Base RAM buffer in bytes
philpem@62 36 uint8_t *exp_ram; ///< Expansion RAM data buffer
philpem@62 37 size_t exp_ram_size; ///< Size of Expansion RAM buffer in bytes
philpem@18 38
philpem@52 39 /// Video RAM
philpem@52 40 uint8_t vram[0x8000];
philpem@24 41
philpem@52 42 /// Map RAM
philpem@52 43 uint8_t map[0x800];
philpem@26 44
philpem@52 45 //// Registers
philpem@37 46 uint16_t genstat; ///< General Status Register
philpem@37 47 uint16_t bsr0; ///< Bus Status Register 0
philpem@37 48 uint16_t bsr1; ///< Bus Status Register 1
philpem@32 49
philpem@52 50 //// MISCELLANEOUS CONTROL REGISTER
philpem@52 51 bool dma_reading; ///< True if Disc DMA reads from the controller, false otherwise
philpem@46 52 uint8_t leds; ///< LED status, 1=on, in order red3/green2/yellow1/red0 from bit3 to bit0
philpem@46 53
philpem@97 54 bool timer_enabled;
philpem@97 55 bool timer_asserted;
philpem@97 56
philpem@52 57 //// GENERAL CONTROL REGISTER
philpem@18 58 /// GENCON.ROMLMAP -- false ORs the address with 0x800000, forcing the
philpem@18 59 /// 68010 to access ROM instead of RAM when booting. TRM page 2-36.
philpem@24 60 bool romlmap;
philpem@44 61 /// GENCON.PIE -- Parity Error Check Enable
philpem@44 62 bool pie;
philpem@101 63 /// GENCON.EE -- Error Enable
philpem@101 64 bool ee;
philpem@52 65
philpem@52 66 /// DMA Address Register
philpem@52 67 uint32_t dma_address;
philpem@52 68
philpem@53 69 /// DMA count
philpem@53 70 uint32_t dma_count;
philpem@53 71
philpem@53 72 /// DMA direction
philpem@53 73 bool idmarw;
philpem@53 74 /// DMA enable
philpem@53 75 bool dmaen;
philpem@53 76 bool dmaenb;
philpem@53 77
philpem@112 78 /// DMA device selection flags
philpem@112 79 bool fd_selected;
philpem@112 80 bool hd_selected;
philpem@52 81 /// Floppy disc controller context
philpem@52 82 WD2797_CTX fdc_ctx;
philpem@95 83 /// Current disc image file
philpem@95 84 FILE *fdc_disc;
philpem@80 85
philpem@112 86 /// Hard disc controller context
philpem@112 87 WD2010_CTX hdc_ctx;
philpem@112 88 FILE *hdc_disc0;
philpem@112 89 FILE *hdc_disc1;
philpem@112 90
philpem@80 91 /// Keyboard controller context
philpem@80 92 KEYBOARD_STATE kbd;
philpem@18 93 } S_state;
philpem@18 94
philpem@18 95 // Global emulator state. Yes, I know global variables are evil, please don't
philpem@18 96 // email me and lecture me about it. -philpem
philpem@18 97 #ifndef _STATE_C
philpem@18 98 extern S_state state;
philpem@18 99 #else
philpem@18 100 S_state state;
philpem@18 101 #endif
philpem@18 102
philpem@18 103 /**
philpem@18 104 * @brief Initialise system state
philpem@18 105 *
philpem@62 106 * @param base_ram_size Base RAM size in bytes -- must be a multiple of 512KiB, min 512KiB, max 2MiB.
philpem@62 107 * @param exp_ram_size Expansion RAM size in bytes -- must be a multiple of 512KiB, min 0, max 2MiB.
philpem@18 108 *
philpem@18 109 * Initialises the emulator's internal state.
philpem@18 110 */
philpem@62 111 int state_init(size_t base_ram_size, size_t exp_ram_size);
philpem@18 112
philpem@18 113 /**
philpem@18 114 * @brief Deinitialise system state
philpem@18 115 *
philpem@18 116 * Deinitialises the saved state, and frees all memory. Call this function
philpem@18 117 * before exiting your program to avoid memory leaks.
philpem@18 118 */
philpem@18 119 void state_done();
philpem@18 120
philpem@18 121 #endif