Fri, 12 Apr 2013 16:26:25 +0100
Don't set PS1 if there is a level-7 interrupt or bus error
PS1 should only be set if the page was originally present (PS1 or PS0 set). If
PS0 and PS1 are clear (page not present) then do NOT set PS1.
Once again the TRM is blatantly and spectacularly wrong...
philpem@18 | 1 | #ifndef _STATE_H |
philpem@18 | 2 | #define _STATE_H |
philpem@18 | 3 | |
philpem@18 | 4 | #include <stddef.h> |
philpem@18 | 5 | #include <stdint.h> |
philpem@18 | 6 | #include <stdbool.h> |
philpem@52 | 7 | #include "wd279x.h" |
philpem@112 | 8 | #include "wd2010.h" |
philpem@80 | 9 | #include "keyboard.h" |
philpem@18 | 10 | |
philpem@18 | 11 | // Maximum size of the Boot PROMs. Must be a binary power of two. |
philpem@18 | 12 | #define ROM_SIZE 32768 |
philpem@18 | 13 | |
philpem@18 | 14 | /** |
philpem@55 | 15 | * State error codes |
philpem@55 | 16 | */ |
philpem@55 | 17 | typedef enum { |
philpem@55 | 18 | STATE_E_OK = 0, ///< Operation succeeded |
philpem@55 | 19 | STATE_E_BAD_RAMSIZE = -1, ///< Bad RAM size specified (not a multiple of 512K, or less than 512K) |
philpem@55 | 20 | STATE_E_NO_MEMORY = -2, ///< Out of memory while allocating state variables |
philpem@55 | 21 | STATE_E_ROM_LOAD_FAIL = -3 ///< Error loading ROMs |
philpem@55 | 22 | } STATE_ERR; |
philpem@55 | 23 | |
philpem@55 | 24 | /** |
philpem@18 | 25 | * @brief Emulator state storage |
philpem@18 | 26 | * |
philpem@18 | 27 | * This structure stores the internal state of the emulator. |
philpem@18 | 28 | */ |
philpem@18 | 29 | typedef struct { |
philpem@18 | 30 | // Boot PROM can be up to 32Kbytes total size |
philpem@18 | 31 | uint8_t rom[ROM_SIZE]; ///< Boot PROM data buffer |
philpem@18 | 32 | |
philpem@52 | 33 | //// Main system RAM |
philpem@60 | 34 | uint8_t *base_ram; ///< Base RAM data buffer |
philpem@60 | 35 | size_t base_ram_size; ///< Size of Base RAM buffer in bytes |
philpem@62 | 36 | uint8_t *exp_ram; ///< Expansion RAM data buffer |
philpem@62 | 37 | size_t exp_ram_size; ///< Size of Expansion RAM buffer in bytes |
philpem@18 | 38 | |
philpem@52 | 39 | /// Video RAM |
philpem@52 | 40 | uint8_t vram[0x8000]; |
philpem@24 | 41 | |
philpem@52 | 42 | /// Map RAM |
philpem@142 | 43 | volatile uint8_t map[0x800]; |
philpem@26 | 44 | |
philpem@52 | 45 | //// Registers |
philpem@37 | 46 | uint16_t genstat; ///< General Status Register |
philpem@37 | 47 | uint16_t bsr0; ///< Bus Status Register 0 |
philpem@37 | 48 | uint16_t bsr1; ///< Bus Status Register 1 |
philpem@32 | 49 | |
philpem@52 | 50 | //// MISCELLANEOUS CONTROL REGISTER |
philpem@52 | 51 | bool dma_reading; ///< True if Disc DMA reads from the controller, false otherwise |
philpem@46 | 52 | uint8_t leds; ///< LED status, 1=on, in order red3/green2/yellow1/red0 from bit3 to bit0 |
philpem@46 | 53 | |
philpem@97 | 54 | bool timer_enabled; |
philpem@97 | 55 | bool timer_asserted; |
philpem@97 | 56 | |
philpem@52 | 57 | //// GENERAL CONTROL REGISTER |
philpem@18 | 58 | /// GENCON.ROMLMAP -- false ORs the address with 0x800000, forcing the |
philpem@18 | 59 | /// 68010 to access ROM instead of RAM when booting. TRM page 2-36. |
philpem@24 | 60 | bool romlmap; |
philpem@44 | 61 | /// GENCON.PIE -- Parity Error Check Enable |
philpem@44 | 62 | bool pie; |
philpem@101 | 63 | /// GENCON.EE -- Error Enable |
philpem@101 | 64 | bool ee; |
philpem@52 | 65 | |
philpem@52 | 66 | /// DMA Address Register |
philpem@52 | 67 | uint32_t dma_address; |
philpem@52 | 68 | |
philpem@53 | 69 | /// DMA count |
philpem@53 | 70 | uint32_t dma_count; |
philpem@53 | 71 | |
philpem@53 | 72 | /// DMA direction |
philpem@53 | 73 | bool idmarw; |
philpem@53 | 74 | /// DMA enable |
philpem@53 | 75 | bool dmaen; |
philpem@53 | 76 | bool dmaenb; |
philpem@53 | 77 | |
philpem@112 | 78 | /// DMA device selection flags |
philpem@112 | 79 | bool fd_selected; |
philpem@112 | 80 | bool hd_selected; |
philpem@52 | 81 | /// Floppy disc controller context |
philpem@52 | 82 | WD2797_CTX fdc_ctx; |
philpem@95 | 83 | /// Current disc image file |
philpem@95 | 84 | FILE *fdc_disc; |
philpem@80 | 85 | |
philpem@112 | 86 | /// Hard disc controller context |
philpem@112 | 87 | WD2010_CTX hdc_ctx; |
philpem@112 | 88 | FILE *hdc_disc0; |
philpem@112 | 89 | FILE *hdc_disc1; |
philpem@112 | 90 | |
philpem@80 | 91 | /// Keyboard controller context |
philpem@80 | 92 | KEYBOARD_STATE kbd; |
philpem@18 | 93 | } S_state; |
philpem@18 | 94 | |
philpem@18 | 95 | // Global emulator state. Yes, I know global variables are evil, please don't |
philpem@18 | 96 | // email me and lecture me about it. -philpem |
philpem@18 | 97 | #ifndef _STATE_C |
philpem@18 | 98 | extern S_state state; |
philpem@18 | 99 | #else |
philpem@18 | 100 | S_state state; |
philpem@18 | 101 | #endif |
philpem@18 | 102 | |
philpem@18 | 103 | /** |
philpem@18 | 104 | * @brief Initialise system state |
philpem@18 | 105 | * |
philpem@62 | 106 | * @param base_ram_size Base RAM size in bytes -- must be a multiple of 512KiB, min 512KiB, max 2MiB. |
philpem@62 | 107 | * @param exp_ram_size Expansion RAM size in bytes -- must be a multiple of 512KiB, min 0, max 2MiB. |
philpem@18 | 108 | * |
philpem@18 | 109 | * Initialises the emulator's internal state. |
philpem@18 | 110 | */ |
philpem@62 | 111 | int state_init(size_t base_ram_size, size_t exp_ram_size); |
philpem@18 | 112 | |
philpem@18 | 113 | /** |
philpem@18 | 114 | * @brief Deinitialise system state |
philpem@18 | 115 | * |
philpem@18 | 116 | * Deinitialises the saved state, and frees all memory. Call this function |
philpem@18 | 117 | * before exiting your program to avoid memory leaks. |
philpem@18 | 118 | */ |
philpem@18 | 119 | void state_done(); |
philpem@18 | 120 | |
philpem@18 | 121 | #endif |