libptouch / file revision

 # Doxyfile 1.5.7.1

 # This file describes the settings to be used by the documentation system

 # doxygen (www.doxygen.org) for a project

 #

 # All text after a hash (#) is considered a comment and will be ignored

 # The format is:

 #       TAG = value [value, ...]

 # For lists items can also be appended using:

 #       TAG += value [value, ...]

 # Values that contain spaces should be placed between quotes (" ")

 #---------------------------------------------------------------------------

 # Project related configuration options

 #---------------------------------------------------------------------------

 # This tag specifies the encoding used for all characters in the config file

 # that follow. The default is UTF-8 which is also the encoding used for all

 # text before the first occurrence of this tag. Doxygen uses libiconv (or the

 # iconv built into libc) for the transcoding. See

 # http://www.gnu.org/software/libiconv for the list of possible encodings.

 DOXYFILE_ENCODING      = UTF-8

 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded

 # by quotes) that should identify the project.

 PROJECT_NAME           = The CImg Library

 # The PROJECT_NUMBER tag can be used to enter a project or revision number.

 # This could be handy for archiving the generated documentation or

 # if some version control system is used.

 PROJECT_NUMBER         = 1.3.0

 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

 # base path where the generated documentation will be put.

 # If a relative path is entered, it will be relative to the location

 # where doxygen was started. If left blank the current directory will be used.

 OUTPUT_DIRECTORY       =

 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

 # 4096 sub-directories (in 2 levels) under the output directory of each output

 # format and will distribute the generated files over these directories.

 # Enabling this option can be useful when feeding doxygen a huge amount of

 # source files, where putting all generated files in the same directory would

 # otherwise cause performance problems for the file system.

 CREATE_SUBDIRS         = NO

 # The OUTPUT_LANGUAGE tag is used to specify the language in which all

 # documentation generated by doxygen is written. Doxygen will use this

 # information to generate all constant output in the proper language.

 # The default language is English, other supported languages are:

 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

 # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,

 # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),

 # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,

 # Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene,

 # Spanish, Swedish, and Ukrainian.

 OUTPUT_LANGUAGE        = English

 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

 # include brief member descriptions after the members that are listed in

 # the file and class documentation (similar to JavaDoc).

 # Set to NO to disable this.

 BRIEF_MEMBER_DESC      = YES

 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

 # the brief description of a member or function before the detailed description.

 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

 # brief descriptions will be completely suppressed.

 REPEAT_BRIEF           = YES

 # This tag implements a quasi-intelligent brief description abbreviator

 # that is used to form the text in various listings. Each string

 # in this list, if found as the leading text of the brief description, will be

 # stripped from the text and the result after processing the whole list, is

 # used as the annotated text. Otherwise, the brief description is used as-is.

 # If left blank, the following values are used ("$name" is automatically

 # replaced with the name of the entity): "The $name class" "The $name widget"

 # "The $name file" "is" "provides" "specifies" "contains"

 # "represents" "a" "an" "the"

 ABBREVIATE_BRIEF       =

 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

 # Doxygen will generate a detailed section even if there is only a brief

 # description.

 ALWAYS_DETAILED_SEC    = NO

 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

 # inherited members of a class in the documentation of that class as if those

 # members were ordinary class members. Constructors, destructors and assignment

 # operators of the base classes will not be shown.

 INLINE_INHERITED_MEMB  = NO

 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

 # path before files name in the file list and in the header files. If set

 # to NO the shortest path that makes the file name unique will be used.

 FULL_PATH_NAMES        = NO

 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

 # can be used to strip a user-defined part of the path. Stripping is

 # only done if one of the specified strings matches the left-hand part of

 # the path. The tag can be used to show relative paths in the file list.

 # If left blank the directory from which doxygen is run is used as the

 # path to strip.

 STRIP_FROM_PATH        =

 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

 # the path mentioned in the documentation of a class, which tells

 # the reader which header file to include in order to use a class.

 # If left blank only the name of the header file containing the class

 # definition is used. Otherwise one should specify the include paths that

 # are normally passed to the compiler using the -I flag.

 STRIP_FROM_INC_PATH    =

 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

 # (but less readable) file names. This can be useful is your file systems

 # doesn't support long names like on DOS, Mac, or CD-ROM.

 SHORT_NAMES            = NO

 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

 # will interpret the first line (until the first dot) of a JavaDoc-style

 # comment as the brief description. If set to NO, the JavaDoc

 # comments will behave just like regular Qt-style comments

 # (thus requiring an explicit @brief command for a brief description.)

 JAVADOC_AUTOBRIEF      = NO

 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will

 # interpret the first line (until the first dot) of a Qt-style

 # comment as the brief description. If set to NO, the comments

 # will behave just like regular Qt-style comments (thus requiring

 # an explicit \brief command for a brief description.)

 QT_AUTOBRIEF           = NO

 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

 # treat a multi-line C++ special comment block (i.e. a block of //! or ///

 # comments) as a brief description. This used to be the default behaviour.

 # The new default is to treat a multi-line C++ comment block as a detailed

 # description. Set this tag to YES if you prefer the old behaviour instead.

 MULTILINE_CPP_IS_BRIEF = YES

 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

 # member inherits the documentation from any documented member that it

 # re-implements.

 INHERIT_DOCS           = YES

 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

 # a new page for each member. If set to NO, the documentation of a member will

 # be part of the file/class/namespace that contains it.

 SEPARATE_MEMBER_PAGES  = NO

 # The TAB_SIZE tag can be used to set the number of spaces in a tab.

 # Doxygen uses this value to replace tabs by spaces in code fragments.

 TAB_SIZE               = 8

 # This tag can be used to specify a number of aliases that acts

 # as commands in the documentation. An alias has the form "name=value".

 # For example adding "sideeffect=\par Side Effects:\n" will allow you to

 # put the command \sideeffect (or @sideeffect) in the documentation, which

 # will result in a user-defined paragraph with heading "Side Effects:".

 # You can put \n's in the value part of an alias to insert newlines.

 ALIASES                =

 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

 # sources only. Doxygen will then generate output that is more tailored for C.

 # For instance, some of the names that are used will be different. The list

 # of all members will be omitted, etc.

 OPTIMIZE_OUTPUT_FOR_C  = NO

 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

 # sources only. Doxygen will then generate output that is more tailored for

 # Java. For instance, namespaces will be presented as packages, qualified

 # scopes will look different, etc.

 OPTIMIZE_OUTPUT_JAVA   = NO

 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran

 # sources only. Doxygen will then generate output that is more tailored for

 # Fortran.

 OPTIMIZE_FOR_FORTRAN   = NO

 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL

 # sources. Doxygen will then generate output that is tailored for

 # VHDL.

 OPTIMIZE_OUTPUT_VHDL   = NO

 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want

 # to include (a tag file for) the STL sources as input, then you should

 # set this tag to YES in order to let doxygen match functions declarations and

 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

 # func(std::string) {}). This also make the inheritance and collaboration

 # diagrams that involve STL classes more complete and accurate.

 BUILTIN_STL_SUPPORT    = NO

 # If you use Microsoft's C++/CLI language, you should set this option to YES to

 # enable parsing support.

 CPP_CLI_SUPPORT        = NO

 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.

 # Doxygen will parse them like normal C++ but will assume all classes use public

 # instead of private inheritance when no explicit protection keyword is present.

 SIP_SUPPORT            = NO

 # For Microsoft's IDL there are propget and propput attributes to indicate getter

 # and setter methods for a property. Setting this option to YES (the default)

 # will make doxygen to replace the get and set methods by a property in the

 # documentation. This will only work if the methods are indeed getting or

 # setting a simple type. If this is not the case, or you want to show the

 # methods anyway, you should set this option to NO.

 IDL_PROPERTY_SUPPORT   = YES

 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

 # tag is set to YES, then doxygen will reuse the documentation of the first

 # member in the group (if any) for the other members of the group. By default

 # all members of a group must be documented explicitly.

 DISTRIBUTE_GROUP_DOC   = NO

 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of

 # the same type (for instance a group of public functions) to be put as a

 # subgroup of that type (e.g. under the Public Functions section). Set it to

 # NO to prevent subgrouping. Alternatively, this can be done per class using

 # the \nosubgrouping command.

 SUBGROUPING            = YES

 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum

 # is documented as struct, union, or enum with the name of the typedef. So

 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct

 # with name TypeT. When disabled the typedef will appear as a member of a file,

 # namespace, or class. And the struct will be named TypeS. This can typically

 # be useful for C code in case the coding convention dictates that all compound

 # types are typedef'ed and only the typedef is referenced, never the tag name.

 TYPEDEF_HIDES_STRUCT   = NO

 # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to

 # determine which symbols to keep in memory and which to flush to disk.

 # When the cache is full, less often used symbols will be written to disk.

 # For small to medium size projects (<1000 input files) the default value is

 # probably good enough. For larger projects a too small cache size can cause

 # doxygen to be busy swapping symbols to and from disk most of the time

 # causing a significant performance penality.

 # If the system has enough physical memory increasing the cache will improve the

 # performance by keeping more symbols in memory. Note that the value works on

 # a logarithmic scale so increasing the size by one will rougly double the

 # memory usage. The cache size is given by this formula:

 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,

 # corresponding to a cache size of 2^16 = 65536 symbols

 SYMBOL_CACHE_SIZE      = 0

 #---------------------------------------------------------------------------

 # Build related configuration options

 #---------------------------------------------------------------------------

 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

 # documentation are documented, even if no documentation was available.

 # Private class members and static file members will be hidden unless

 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

 EXTRACT_ALL            = NO

 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class

 # will be included in the documentation.

 EXTRACT_PRIVATE        = NO

 # If the EXTRACT_STATIC tag is set to YES all static members of a file

 # will be included in the documentation.

 EXTRACT_STATIC         = NO

 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

 # defined locally in source files will be included in the documentation.

 # If set to NO only classes defined in header files are included.

 EXTRACT_LOCAL_CLASSES  = NO

 # This flag is only useful for Objective-C code. When set to YES local

 # methods, which are defined in the implementation section but not in

 # the interface are included in the documentation.

 # If set to NO (the default) only methods in the interface are included.

 EXTRACT_LOCAL_METHODS  = NO

 # If this flag is set to YES, the members of anonymous namespaces will be

 # extracted and appear in the documentation as a namespace called

 # 'anonymous_namespace{file}', where file will be replaced with the base

 # name of the file that contains the anonymous namespace. By default

 # anonymous namespace are hidden.

 EXTRACT_ANON_NSPACES   = NO

 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

 # undocumented members of documented classes, files or namespaces.

 # If set to NO (the default) these members will be included in the

 # various overviews, but no documentation section is generated.

 # This option has no effect if EXTRACT_ALL is enabled.

 HIDE_UNDOC_MEMBERS     = YES

 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

 # undocumented classes that are normally visible in the class hierarchy.

 # If set to NO (the default) these classes will be included in the various

 # overviews. This option has no effect if EXTRACT_ALL is enabled.

 HIDE_UNDOC_CLASSES     = YES

 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

 # friend (class|struct|union) declarations.

 # If set to NO (the default) these declarations will be included in the

 # documentation.

 HIDE_FRIEND_COMPOUNDS  = NO

 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

 # documentation blocks found inside the body of a function.

 # If set to NO (the default) these blocks will be appended to the

 # function's detailed documentation block.

 HIDE_IN_BODY_DOCS      = NO

 # The INTERNAL_DOCS tag determines if documentation

 # that is typed after a \internal command is included. If the tag is set

 # to NO (the default) then the documentation will be excluded.

 # Set it to YES to include the internal documentation.

 INTERNAL_DOCS          = NO

 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

 # file names in lower-case letters. If set to YES upper-case letters are also

 # allowed. This is useful if you have classes or files whose names only differ

 # in case and if your file system supports case sensitive file names. Windows

 # and Mac users are advised to set this option to NO.

 CASE_SENSE_NAMES       = YES

 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

 # will show members with their full class and namespace scopes in the

 # documentation. If set to YES the scope will be hidden.

 HIDE_SCOPE_NAMES       = YES

 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

 # will put a list of the files that are included by a file in the documentation

 # of that file.

 SHOW_INCLUDE_FILES     = NO

 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

 # is inserted in the documentation for inline members.

 INLINE_INFO            = YES

 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

 # will sort the (detailed) documentation of file and class members

 # alphabetically by member name. If set to NO the members will appear in

 # declaration order.

 SORT_MEMBER_DOCS       = NO

 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

 # brief documentation of file, namespace and class members alphabetically

 # by member name. If set to NO (the default) the members will appear in

 # declaration order.

 SORT_BRIEF_DOCS        = NO

 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the

 # hierarchy of group names into alphabetical order. If set to NO (the default)

 # the group names will appear in their defined order.

 SORT_GROUP_NAMES       = NO

 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

 # sorted by fully-qualified names, including namespaces. If set to

 # NO (the default), the class list will be sorted only by class name,

 # not including the namespace part.

 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

 # Note: This option applies only to the class list, not to the

 # alphabetical list.

 SORT_BY_SCOPE_NAME     = NO

 # The GENERATE_TODOLIST tag can be used to enable (YES) or

 # disable (NO) the todo list. This list is created by putting \todo

 # commands in the documentation.

 GENERATE_TODOLIST      = NO

 # The GENERATE_TESTLIST tag can be used to enable (YES) or

 # disable (NO) the test list. This list is created by putting \test

 # commands in the documentation.

 GENERATE_TESTLIST      = NO

 # The GENERATE_BUGLIST tag can be used to enable (YES) or

 # disable (NO) the bug list. This list is created by putting \bug

 # commands in the documentation.

 GENERATE_BUGLIST       = NO

 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

 # disable (NO) the deprecated list. This list is created by putting

 # \deprecated commands in the documentation.

 GENERATE_DEPRECATEDLIST= NO

 # The ENABLED_SECTIONS tag can be used to enable conditional

 # documentation sections, marked by \if sectionname ... \endif.

 ENABLED_SECTIONS       =

 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines

 # the initial value of a variable or define consists of for it to appear in

 # the documentation. If the initializer consists of more lines than specified

 # here it will be hidden. Use a value of 0 to hide initializers completely.

 # The appearance of the initializer of individual variables and defines in the

 # documentation can be controlled using \showinitializer or \hideinitializer

 # command in the documentation regardless of this setting.

 MAX_INITIALIZER_LINES  = 30

 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated

 # at the bottom of the documentation of classes and structs. If set to YES the

 # list will mention the files that were used to generate the documentation.

 SHOW_USED_FILES        = NO

 # If the sources in your project are distributed over multiple directories

 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

 # in the documentation. The default is NO.

 SHOW_DIRECTORIES       = NO

 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.

 # This will remove the Files entry from the Quick Index and from the

 # Folder Tree View (if specified). The default is YES.

 SHOW_FILES             = NO

 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the

 # Namespaces page.  This will remove the Namespaces entry from the Quick Index

 # and from the Folder Tree View (if specified). The default is YES.

 SHOW_NAMESPACES        = YES

 # The FILE_VERSION_FILTER tag can be used to specify a program or script that

 # doxygen should invoke to get the current version for each file (typically from

 # the version control system). Doxygen will invoke the program by executing (via

 # popen()) the command <command> <input-file>, where <command> is the value of

 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

 # provided by doxygen. Whatever the program writes to standard output

 # is used as the file version. See the manual for examples.

 FILE_VERSION_FILTER    =

 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by

 # doxygen. The layout file controls the global structure of the generated output files

 # in an output format independent way. The create the layout file that represents

 # doxygen's defaults, run doxygen with the -l option. You can optionally specify a

 # file name after the option, if omitted DoxygenLayout.xml will be used as the name

 # of the layout file.

 LAYOUT_FILE            =

 #---------------------------------------------------------------------------

 # configuration options related to warning and progress messages

 #---------------------------------------------------------------------------

 # The QUIET tag can be used to turn on/off the messages that are generated

 # by doxygen. Possible values are YES and NO. If left blank NO is used.

 QUIET                  = NO

 # The WARNINGS tag can be used to turn on/off the warning messages that are

 # generated by doxygen. Possible values are YES and NO. If left blank

 # NO is used.

 WARNINGS               = YES

 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will

 # automatically be disabled.

 WARN_IF_UNDOCUMENTED   = YES

 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

 # potential errors in the documentation, such as not documenting some

 # parameters in a documented function, or documenting parameters that

 # don't exist or using markup commands wrongly.

 WARN_IF_DOC_ERROR      = YES

 # This WARN_NO_PARAMDOC option can be abled to get warnings for

 # functions that are documented, but have no documentation for their parameters

 # or return value. If set to NO (the default) doxygen will only warn about

 # wrong or incomplete parameter documentation, but not about the absence of

 # documentation.

 WARN_NO_PARAMDOC       = NO

 # The WARN_FORMAT tag determines the format of the warning messages that

 # doxygen can produce. The string should contain the $file, $line, and $text

 # tags, which will be replaced by the file and line number from which the

 # warning originated and the warning text. Optionally the format may contain

 # $version, which will be replaced by the version of the file (if it could

 # be obtained via FILE_VERSION_FILTER)

 WARN_FORMAT            = "$file:$line: $text"

 # The WARN_LOGFILE tag can be used to specify a file to which warning

 # and error messages should be written. If left blank the output is written

 # to stderr.

 WARN_LOGFILE           =

 #---------------------------------------------------------------------------

 # configuration options related to the input files

 #---------------------------------------------------------------------------

 # The INPUT tag can be used to specify the files and/or directories that contain

 # documented source files. You may enter file names like "myfile.cpp" or

 # directories like "/usr/src/myproject". Separate the files or directories

 # with spaces.

 INPUT                  =../CImg.h CImg_documentation.h

 # This tag can be used to specify the character encoding of the source files

 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is

 # also the default input encoding. Doxygen uses libiconv (or the iconv built

 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for

 # the list of possible encodings.

 INPUT_ENCODING         = UTF-8

 # If the value of the INPUT tag contains directories, you can use the

 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

 # and *.h) to filter out the source-files in the directories. If left

 # blank the following patterns are tested:

 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90

 FILE_PATTERNS          =

 # The RECURSIVE tag can be used to turn specify whether or not subdirectories

 # should be searched for input files as well. Possible values are YES and NO.

 # If left blank NO is used.

 RECURSIVE              = NO

 # The EXCLUDE tag can be used to specify files and/or directories that should

 # excluded from the INPUT source files. This way you can easily exclude a

 # subdirectory from a directory tree whose root is specified with the INPUT tag.

 EXCLUDE                =

 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or

 # directories that are symbolic links (a Unix filesystem feature) are excluded

 # from the input.

 EXCLUDE_SYMLINKS       = NO

 # If the value of the INPUT tag contains directories, you can use the

 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

 # certain files from those directories. Note that the wildcards are matched

 # against the file with absolute path, so to exclude all test directories

 # for example use the pattern */test/*

 EXCLUDE_PATTERNS       =

 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names

 # (namespaces, classes, functions, etc.) that should be excluded from the

 # output. The symbol name can be a fully qualified name, a word, or if the

 # wildcard * is used, a substring. Examples: ANamespace, AClass,

 # AClass::ANamespace, ANamespace::*Test

 EXCLUDE_SYMBOLS        =

 # The EXAMPLE_PATH tag can be used to specify one or more files or

 # directories that contain example code fragments that are included (see

 # the \include command).

 EXAMPLE_PATH           =

 # If the value of the EXAMPLE_PATH tag contains directories, you can use the

 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

 # and *.h) to filter out the source-files in the directories. If left

 # blank all files are included.

 EXAMPLE_PATTERNS       =

 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

 # searched for input files to be used with the \include or \dontinclude

 # commands irrespective of the value of the RECURSIVE tag.

 # Possible values are YES and NO. If left blank NO is used.

 EXAMPLE_RECURSIVE      = NO

 # The IMAGE_PATH tag can be used to specify one or more files or

 # directories that contain image that are included in the documentation (see

 # the \image command).

 IMAGE_PATH             =

 # The INPUT_FILTER tag can be used to specify a program that doxygen should

 # invoke to filter for each input file. Doxygen will invoke the filter program

 # by executing (via popen()) the command <filter> <input-file>, where <filter>

 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an

 # input file. Doxygen will then use the output that the filter program writes

 # to standard output.  If FILTER_PATTERNS is specified, this tag will be

 # ignored.

 INPUT_FILTER           =

 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

 # basis.  Doxygen will compare the file name with each pattern and apply the

 # filter if there is a match.  The filters are a list of the form:

 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

 # is applied to all files.

 FILTER_PATTERNS        =

 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

 # INPUT_FILTER) will be used to filter the input files when producing source

 # files to browse (i.e. when SOURCE_BROWSER is set to YES).

 FILTER_SOURCE_FILES    = NO

 #---------------------------------------------------------------------------

 # configuration options related to source browsing

 #---------------------------------------------------------------------------

 # If the SOURCE_BROWSER tag is set to YES then a list of source files will

 # be generated. Documented entities will be cross-referenced with these sources.

 # Note: To get rid of all source code in the generated output, make sure also

 # VERBATIM_HEADERS is set to NO.

 SOURCE_BROWSER         = NO

 # Setting the INLINE_SOURCES tag to YES will include the body

 # of functions and classes directly in the documentation.

 INLINE_SOURCES         = NO

 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

 # doxygen to hide any special comment blocks from generated source code

 # fragments. Normal C and C++ comments will always remain visible.

 STRIP_CODE_COMMENTS    = YES

 # If the REFERENCED_BY_RELATION tag is set to YES

 # then for each documented function all documented

 # functions referencing it will be listed.

 REFERENCED_BY_RELATION = NO

 # If the REFERENCES_RELATION tag is set to YES

 # then for each documented function all documented entities

 # called/used by that function will be listed.

 REFERENCES_RELATION    = NO

 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

 # link to the source code.  Otherwise they will link to the documentstion.

 REFERENCES_LINK_SOURCE = YES

 # If the USE_HTAGS tag is set to YES then the references to source code

 # will point to the HTML generated by the htags(1) tool instead of doxygen

 # built-in source browser. The htags tool is part of GNU's global source

 # tagging system (see http://www.gnu.org/software/global/global.html). You

 # will need version 4.8.6 or higher.

 USE_HTAGS              = NO

 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

 # will generate a verbatim copy of the header file for each class for

 # which an include is specified. Set to NO to disable this.

 VERBATIM_HEADERS       = NO

 #---------------------------------------------------------------------------

 # configuration options related to the alphabetical class index

 #---------------------------------------------------------------------------

 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

 # of all compounds will be generated. Enable this if the project

 # contains a lot of classes, structs, unions or interfaces.

 ALPHABETICAL_INDEX     = NO

 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

 # in which this list will be split (can be a number in the range [1..20])

 COLS_IN_ALPHA_INDEX    = 5

 # In case all classes in a project start with a common prefix, all

 # classes will be put under the same header in the alphabetical index.

 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that

 # should be ignored while generating the index headers.

 IGNORE_PREFIX          =

 #---------------------------------------------------------------------------

 # configuration options related to the HTML output

 #---------------------------------------------------------------------------

 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will

 # generate HTML output.

 GENERATE_HTML          = YES

 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be

 # put in front of it. If left blank `html' will be used as the default path.

 HTML_OUTPUT            = reference

 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for

 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank

 # doxygen will generate files with .html extension.

 HTML_FILE_EXTENSION    = .html

 # The HTML_HEADER tag can be used to specify a personal HTML header for

 # each generated HTML page. If it is left blank doxygen will generate a

 # standard header.

 HTML_HEADER            = header_reference.html

 # The HTML_FOOTER tag can be used to specify a personal HTML footer for

 # each generated HTML page. If it is left blank doxygen will generate a

 # standard footer.

 HTML_FOOTER            = footer.html

 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading

 # style sheet that is used by each HTML page. It can be used to

 # fine-tune the look of the HTML output. If the tag is left blank doxygen

 # will generate a default style sheet. Note that doxygen will try to copy

 # the style sheet file to the HTML output directory, so don't put your own

 # stylesheet in the HTML output directory as well, or it will be erased!

 HTML_STYLESHEET        =

 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

 # files or namespaces will be aligned in HTML using tables. If set to

 # NO a bullet list will be used.

 HTML_ALIGN_MEMBERS     = YES

 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML

 # documentation will contain sections that can be hidden and shown after the

 # page has loaded. For this to work a browser that supports

 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox

 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).

 HTML_DYNAMIC_SECTIONS  = YES

 # If the GENERATE_DOCSET tag is set to YES, additional index files

 # will be generated that can be used as input for Apple's Xcode 3

 # integrated development environment, introduced with OSX 10.5 (Leopard).

 # To create a documentation set, doxygen will generate a Makefile in the

 # HTML output directory. Running make will produce the docset in that

 # directory and running "make install" will install the docset in

 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find

 # it at startup.

 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

 GENERATE_DOCSET        = NO

 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the

 # feed. A documentation feed provides an umbrella under which multiple

 # documentation sets from a single provider (such as a company or product suite)

 # can be grouped.

 DOCSET_FEEDNAME        = "Doxygen generated docs"

 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that

 # should uniquely identify the documentation set bundle. This should be a

 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen

 # will append .docset to the name.

 DOCSET_BUNDLE_ID       = org.doxygen.Project

 # If the GENERATE_HTMLHELP tag is set to YES, additional index files

 # will be generated that can be used as input for tools like the

 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)

 # of the generated HTML documentation.

 GENERATE_HTMLHELP      = NO

 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

 # be used to specify the file name of the resulting .chm file. You

 # can add a path in front of the file if the result should not be

 # written to the html output directory.

 CHM_FILE               =

 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

 # be used to specify the location (absolute path including file name) of

 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

 # the HTML help compiler on the generated index.hhp.

 HHC_LOCATION           =

 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

 # controls if a separate .chi index file is generated (YES) or that

 # it should be included in the master .chm file (NO).

 GENERATE_CHI           = NO

 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING

 # is used to encode HtmlHelp index (hhk), content (hhc) and project file

 # content.

 CHM_INDEX_ENCODING     =

 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

 # controls whether a binary table of contents is generated (YES) or a

 # normal table of contents (NO) in the .chm file.

 BINARY_TOC             = NO

 # The TOC_EXPAND flag can be set to YES to add extra items for group members

 # to the contents of the HTML help documentation and to the tree view.

 TOC_EXPAND             = NO

 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER

 # are set, an additional index file will be generated that can be used as input for

 # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated

 # HTML documentation.

 GENERATE_QHP           = NO

 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can

 # be used to specify the file name of the resulting .qch file.

 # The path specified is relative to the HTML output folder.

 QCH_FILE               =

 # The QHP_NAMESPACE tag specifies the namespace to use when generating

 # Qt Help Project output. For more information please see

 # <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>.

 QHP_NAMESPACE          = org.doxygen.Project

 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating

 # Qt Help Project output. For more information please see

 # <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>.

 QHP_VIRTUAL_FOLDER     = doc

 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can

 # be used to specify the location of Qt's qhelpgenerator.

 # If non-empty doxygen will try to run qhelpgenerator on the generated

 # .qhp file .

 QHG_LOCATION           =

 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at

 # top of each HTML page. The value NO (the default) enables the index and

 # the value YES disables it.

 DISABLE_INDEX          = NO

 # This tag can be used to set the number of enum values (range [1..20])

 # that doxygen will group on one line in the generated HTML documentation.

 ENUM_VALUES_PER_LINE   = 4

 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index

 # structure should be generated to display hierarchical information.

 # If the tag value is set to FRAME, a side panel will be generated

 # containing a tree-like index structure (just like the one that

 # is generated for HTML Help). For this to work a browser that supports

 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,

 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are

 # probably better off using the HTML help feature. Other possible values

 # for this tag are: HIERARCHIES, which will generate the Groups, Directories,

 # and Class Hierarchy pages using a tree view instead of an ordered list;

 # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which

 # disables this behavior completely. For backwards compatibility with previous

 # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE

 # respectively.

 GENERATE_TREEVIEW      = NONE

 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

 # used to set the initial width (in pixels) of the frame in which the tree

 # is shown.

 TREEVIEW_WIDTH         = 250

 # Use this tag to change the font size of Latex formulas included

 # as images in the HTML documentation. The default is 10. Note that

 # when you change the font size after a successful doxygen run you need

 # to manually remove any form_*.png images from the HTML output directory

 # to force them to be regenerated.

 FORMULA_FONTSIZE       = 10

 #---------------------------------------------------------------------------

 # configuration options related to the LaTeX output

 #---------------------------------------------------------------------------

 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

 # generate Latex output.

 GENERATE_LATEX         = YES

 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be

 # put in front of it. If left blank `latex' will be used as the default path.

 LATEX_OUTPUT           = latex

 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

 # invoked. If left blank `latex' will be used as the default command name.

 LATEX_CMD_NAME         = latex

 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

 # generate index for LaTeX. If left blank `makeindex' will be used as the

 # default command name.

 MAKEINDEX_CMD_NAME     = makeindex

 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

 # LaTeX documents. This may be useful for small projects and may help to

 # save some trees in general.

 COMPACT_LATEX          = NO

 # The PAPER_TYPE tag can be used to set the paper type that is used

 # by the printer. Possible values are: a4, a4wide, letter, legal and

 # executive. If left blank a4wide will be used.

 PAPER_TYPE             = a4wide

 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

 # packages that should be included in the LaTeX output.

 EXTRA_PACKAGES         =

 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for

 # the generated latex document. The header should contain everything until

 # the first chapter. If it is left blank doxygen will generate a

 # standard header. Notice: only use this tag if you know what you are doing!

 LATEX_HEADER           =

 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

 # is prepared for conversion to pdf (using ps2pdf). The pdf file will

 # contain links (just like the HTML output) instead of page references

 # This makes the output suitable for online browsing using a pdf viewer.

 PDF_HYPERLINKS         = YES

 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

 # plain latex in the generated Makefile. Set this option to YES to get a

 # higher quality PDF documentation.

 USE_PDFLATEX           = YES

 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

 # command to the generated LaTeX files. This will instruct LaTeX to keep

 # running if errors occur, instead of asking the user for help.

 # This option is also used when generating formulas in HTML.

 LATEX_BATCHMODE        = NO

 # If LATEX_HIDE_INDICES is set to YES then doxygen will not

 # include the index chapters (such as File Index, Compound Index, etc.)

 # in the output.

 LATEX_HIDE_INDICES     = NO

 #---------------------------------------------------------------------------

 # configuration options related to the RTF output

 #---------------------------------------------------------------------------

 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

 # The RTF output is optimized for Word 97 and may not look very pretty with

 # other RTF readers or editors.

 GENERATE_RTF           = NO

 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be

 # put in front of it. If left blank `rtf' will be used as the default path.

 RTF_OUTPUT             = rtf

 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact

 # RTF documents. This may be useful for small projects and may help to

 # save some trees in general.

 COMPACT_RTF            = NO

 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

 # will contain hyperlink fields. The RTF file will

 # contain links (just like the HTML output) instead of page references.

 # This makes the output suitable for online browsing using WORD or other

 # programs which support those fields.

 # Note: wordpad (write) and others do not support links.

 RTF_HYPERLINKS         = NO

 # Load stylesheet definitions from file. Syntax is similar to doxygen's

 # config file, i.e. a series of assignments. You only have to provide

 # replacements, missing definitions are set to their default value.

 RTF_STYLESHEET_FILE    =

 # Set optional variables used in the generation of an rtf document.

 # Syntax is similar to doxygen's config file.

 RTF_EXTENSIONS_FILE    =

 #---------------------------------------------------------------------------

 # configuration options related to the man page output

 #---------------------------------------------------------------------------

 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will

 # generate man pages

 GENERATE_MAN           = NO

 # The MAN_OUTPUT tag is used to specify where the man pages will be put.

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be

 # put in front of it. If left blank `man' will be used as the default path.

 MAN_OUTPUT             = man

 # The MAN_EXTENSION tag determines the extension that is added to

 # the generated man pages (default is the subroutine's section .3)

 MAN_EXTENSION          = .3

 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,

 # then it will generate one additional man file for each entity

 # documented in the real man page(s). These additional files

 # only source the real man page, but without them the man command

 # would be unable to find the correct page. The default is NO.

 MAN_LINKS              = NO

 #---------------------------------------------------------------------------

 # configuration options related to the XML output

 #---------------------------------------------------------------------------

 # If the GENERATE_XML tag is set to YES Doxygen will

 # generate an XML file that captures the structure of

 # the code including all documentation.

 GENERATE_XML           = NO

 # The XML_OUTPUT tag is used to specify where the XML pages will be put.

 # If a relative path is entered the value of OUTPUT_DIRECTORY will be

 # put in front of it. If left blank `xml' will be used as the default path.

 XML_OUTPUT             = xml

 # The XML_SCHEMA tag can be used to specify an XML schema,

 # which can be used by a validating XML parser to check the

 # syntax of the XML files.

 XML_SCHEMA             =

 # The XML_DTD tag can be used to specify an XML DTD,

 # which can be used by a validating XML parser to check the

 # syntax of the XML files.

 XML_DTD                =

 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will

 # dump the program listings (including syntax highlighting

 # and cross-referencing information) to the XML output. Note that

 # enabling this will significantly increase the size of the XML output.

 XML_PROGRAMLISTING     = YES

 #---------------------------------------------------------------------------

 # configuration options for the AutoGen Definitions output

 #---------------------------------------------------------------------------

 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

 # generate an AutoGen Definitions (see autogen.sf.net) file

 # that captures the structure of the code including all

 # documentation. Note that this feature is still experimental

 # and incomplete at the moment.

 GENERATE_AUTOGEN_DEF   = NO

 #---------------------------------------------------------------------------

 # configuration options related to the Perl module output

 #---------------------------------------------------------------------------

 # If the GENERATE_PERLMOD tag is set to YES Doxygen will

 # generate a Perl module file that captures the structure of

 # the code including all documentation. Note that this

 # feature is still experimental and incomplete at the

 # moment.

 GENERATE_PERLMOD       = NO

 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate

 # the necessary Makefile rules, Perl scripts and LaTeX code to be able

 # to generate PDF and DVI output from the Perl module output.

 PERLMOD_LATEX          = NO

 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

 # nicely formatted so it can be parsed by a human reader.  This is useful

 # if you want to understand what is going on.  On the other hand, if this

 # tag is set to NO the size of the Perl module output will be much smaller

 # and Perl will parse it just the same.

 PERLMOD_PRETTY         = YES

 # The names of the make variables in the generated doxyrules.make file

 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

 # This is useful so different doxyrules.make files included by the same

 # Makefile don't overwrite each other's variables.

 PERLMOD_MAKEVAR_PREFIX =

 #---------------------------------------------------------------------------

 # Configuration options related to the preprocessor

 #---------------------------------------------------------------------------

 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

 # evaluate all C-preprocessor directives found in the sources and include

 # files.

 ENABLE_PREPROCESSING   = YES

 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

 # names in the source code. If set to NO (the default) only conditional

 # compilation will be performed. Macro expansion can be done in a controlled

 # way by setting EXPAND_ONLY_PREDEF to YES.

 MACRO_EXPANSION        = NO

 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

 # then the macro expansion is limited to the macros specified with the

 # PREDEFINED and EXPAND_AS_DEFINED tags.

 EXPAND_ONLY_PREDEF     = NO

 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

 # in the INCLUDE_PATH (see below) will be search if a #include is found.

 SEARCH_INCLUDES        = YES

 # The INCLUDE_PATH tag can be used to specify one or more directories that

 # contain include files that are not input files but should be processed by

 # the preprocessor.

 INCLUDE_PATH           =

 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

 # patterns (like *.h and *.hpp) to filter out the header-files in the

 # directories. If left blank, the patterns specified with FILE_PATTERNS will

 # be used.

 INCLUDE_FILE_PATTERNS  =

 # The PREDEFINED tag can be used to specify one or more macro names that

 # are defined before the preprocessor is started (similar to the -D option of

 # gcc). The argument of the tag is a list of macros of the form: name

 # or name=definition (no spaces). If the definition and the = are

 # omitted =1 is assumed. To prevent a macro definition from being

 # undefined via #undef or recursively expanded use the := operator

 # instead of the = operator.

 PREDEFINED             =

 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

 # this tag can be used to specify a list of macro names that should be expanded.

 # The macro definition that is found in the sources will be used.

 # Use the PREDEFINED tag if you want to use a different macro definition.

 EXPAND_AS_DEFINED      =

 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

 # doxygen's preprocessor will remove all function-like macros that are alone

 # on a line, have an all uppercase name, and do not end with a semicolon. Such

 # function macros are typically used for boiler-plate code, and will confuse

 # the parser if not removed.

 SKIP_FUNCTION_MACROS   = YES

 #---------------------------------------------------------------------------

 # Configuration::additions related to external references

 #---------------------------------------------------------------------------

 # The TAGFILES option can be used to specify one or more tagfiles.

 # Optionally an initial location of the external documentation

 # can be added for each tagfile. The format of a tag file without

 # this location is as follows:

 #   TAGFILES = file1 file2 ...

 # Adding location for the tag files is done as follows:

 #   TAGFILES = file1=loc1 "file2 = loc2" ...

 # where "loc1" and "loc2" can be relative or absolute paths or

 # URLs. If a location is present for each tag, the installdox tool

 # does not have to be run to correct the links.

 # Note that each tag file must have a unique name

 # (where the name does NOT include the path)

 # If a tag file is not located in the directory in which doxygen

 # is run, you must also specify the path to the tagfile here.

 TAGFILES               =

 # When a file name is specified after GENERATE_TAGFILE, doxygen will create

 # a tag file that is based on the input files it reads.

 GENERATE_TAGFILE       =

 # If the ALLEXTERNALS tag is set to YES all external classes will be listed

 # in the class index. If set to NO only the inherited external classes

 # will be listed.

 ALLEXTERNALS           = NO

 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

 # in the modules index. If set to NO, only the current project's groups will

 # be listed.

 EXTERNAL_GROUPS        = YES

 # The PERL_PATH should be the absolute path and name of the perl script

 # interpreter (i.e. the result of `which perl').

 PERL_PATH              = /usr/bin/perl

 #---------------------------------------------------------------------------

 # Configuration options related to the dot tool

 #---------------------------------------------------------------------------

 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

 # or super classes. Setting the tag to NO turns the diagrams off. Note that

 # this option is superseded by the HAVE_DOT option below. This is only a

 # fallback. It is recommended to install and use dot, since it yields more

 # powerful graphs.

 CLASS_DIAGRAMS         = NO

 # You can define message sequence charts within doxygen comments using the \msc

 # command. Doxygen will then run the mscgen tool (see

 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the

 # documentation. The MSCGEN_PATH tag allows you to specify the directory where

 # the mscgen tool resides. If left empty the tool is assumed to be found in the

 # default search path.

 MSCGEN_PATH            =

 # If set to YES, the inheritance and collaboration graphs will hide

 # inheritance and usage relations if the target is undocumented

 # or is not a class.

 HIDE_UNDOC_RELATIONS   = YES

 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

 # available from the path. This tool is part of Graphviz, a graph visualization

 # toolkit from AT&T and Lucent Bell Labs. The other options in this section

 # have no effect if this option is set to NO (the default)

 HAVE_DOT               = NO

 # By default doxygen will write a font called FreeSans.ttf to the output

 # directory and reference it in all dot files that doxygen generates. This

 # font does not include all possible unicode characters however, so when you need

 # these (or just want a differently looking font) you can specify the font name

 # using DOT_FONTNAME. You need need to make sure dot is able to find the font,

 # which can be done by putting it in a standard location or by setting the

 # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory

 # containing the font.

 DOT_FONTNAME           = FreeSans

 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.

 # The default size is 10pt.

 DOT_FONTSIZE           = 10

 # By default doxygen will tell dot to use the output directory to look for the

 # FreeSans.ttf font (which doxygen will put there itself). If you specify a

 # different font using DOT_FONTNAME you can set the path where dot

 # can find it using this tag.

 DOT_FONTPATH           =

 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

 # will generate a graph for each documented class showing the direct and

 # indirect inheritance relations. Setting this tag to YES will force the

 # the CLASS_DIAGRAMS tag to NO.

 CLASS_GRAPH            = YES

 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

 # will generate a graph for each documented class showing the direct and

 # indirect implementation dependencies (inheritance, containment, and

 # class references variables) of the class with other documented classes.

 COLLABORATION_GRAPH    = YES

 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

 # will generate a graph for groups, showing the direct groups dependencies

 GROUP_GRAPHS           = YES

 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and

 # collaboration diagrams in a style similar to the OMG's Unified Modeling

 # Language.

 UML_LOOK               = NO

 # If set to YES, the inheritance and collaboration graphs will show the

 # relations between templates and their instances.

 TEMPLATE_RELATIONS     = NO

 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

 # tags are set to YES then doxygen will generate a graph for each documented

 # file showing the direct and indirect include dependencies of the file with

 # other documented files.

 INCLUDE_GRAPH          = YES

 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each

 # documented header file showing the documented files that directly or

 # indirectly include this file.

 INCLUDED_BY_GRAPH      = YES

 # If the CALL_GRAPH and HAVE_DOT options are set to YES then

 # doxygen will generate a call dependency graph for every global function

 # or class method. Note that enabling this option will significantly increase

 # the time of a run. So in most cases it will be better to enable call graphs

 # for selected functions only using the \callgraph command.

 CALL_GRAPH             = NO

 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then

 # doxygen will generate a caller dependency graph for every global function

 # or class method. Note that enabling this option will significantly increase

 # the time of a run. So in most cases it will be better to enable caller

 # graphs for selected functions only using the \callergraph command.

 CALLER_GRAPH           = NO

 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

 # will graphical hierarchy of all classes instead of a textual one.

 GRAPHICAL_HIERARCHY    = YES

 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

 # then doxygen will show the dependencies a directory has on other directories

 # in a graphical way. The dependency relations are determined by the #include

 # relations between the files in the directories.

 DIRECTORY_GRAPH        = YES

 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

 # generated by dot. Possible values are png, jpg, or gif

 # If left blank png will be used.

 DOT_IMAGE_FORMAT       = png

 # The tag DOT_PATH can be used to specify the path where the dot tool can be

 # found. If left blank, it is assumed the dot tool can be found in the path.

 DOT_PATH               =

 # The DOTFILE_DIRS tag can be used to specify one or more directories that

 # contain dot files that are included in the documentation (see the

 # \dotfile command).

 DOTFILE_DIRS           =

 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of

 # nodes that will be shown in the graph. If the number of nodes in a graph

 # becomes larger than this value, doxygen will truncate the graph, which is

 # visualized by representing a node as a red box. Note that doxygen if the

 # number of direct children of the root node in a graph is already larger than

 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note

 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

 DOT_GRAPH_MAX_NODES    = 50

 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

 # graphs generated by dot. A depth value of 3 means that only nodes reachable

 # from the root by following a path via at most 3 edges will be shown. Nodes

 # that lay further from the root node will be omitted. Note that setting this

 # option to 1 or 2 may greatly reduce the computation time needed for large

 # code bases. Also note that the size of a graph can be further restricted by

 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

 MAX_DOT_GRAPH_DEPTH    = 0

 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

 # background. This is disabled by default, because dot on Windows does not

 # seem to support this out of the box. Warning: Depending on the platform used,

 # enabling this option may lead to badly anti-aliased labels on the edges of

 # a graph (i.e. they become hard to read).

 DOT_TRANSPARENT        = NO

 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

 # files in one run (i.e. multiple -o and -T options on the command line). This

 # makes dot run faster, but since only newer versions of dot (>1.8.10)

 # support this, this feature is disabled by default.

 DOT_MULTI_TARGETS      = NO

 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

 # generate a legend page explaining the meaning of the various boxes and

 # arrows in the dot generated graphs.

 GENERATE_LEGEND        = YES

 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

 # remove the intermediate dot files that are used to generate

 # the various graphs.

 DOT_CLEANUP            = YES

 #---------------------------------------------------------------------------

 # Configuration::additions related to the search engine

 #---------------------------------------------------------------------------

 # The SEARCHENGINE tag specifies whether or not a search engine should be

 # used. If set to NO the values of all tags below this one will be ignored.

 SEARCHENGINE           = NO