libptouch / files

     1.1 --- a/src/ptouch.c	Thu Sep 24 22:29:12 2009 +0100
     1.2 +++ b/src/ptouch.c	Fri Sep 25 10:50:44 2009 +0100
     1.3 @@ -115,6 +115,10 @@
     1.4  	dev->phaseLo      = buf[21];
     1.5  	dev->notification = buf[22];
     1.6  
     1.7 +	// Set DPI
     1.8 +	dev->dpiPrinthead = 180;
     1.9 +	dev->dpiLabel     = 180;
    1.10 +
    1.11  	// Set pixel width (label width in pixels)
    1.12  	if (dev->mediaWidth >= 24) {
    1.13  		// Label tape is 24mm or wider. Print head is 128 dots at 180dpi,
    1.14 @@ -127,7 +131,7 @@
    1.15  		// floating point to convert from inches to mm. The -2 is a
    1.16  		// safety margin -- one pixel on either side of the label.
    1.17  		// This is far closer than Brother suggest, but hey-ho.
    1.18 -		dev->pixelWidth = ((dev->mediaWidth * 180 * 10) / 254) - 2;
    1.19 +		dev->pixelWidth = ((dev->mediaWidth * dev->dpiPrinthead * 10) / 254) - 2;
    1.20  	}
    1.21  
    1.22  	// Operation succeeded

     2.1 --- a/src/ptouch.h	Thu Sep 24 22:29:12 2009 +0100
     2.2 +++ b/src/ptouch.h	Fri Sep 25 10:50:44 2009 +0100
     2.3 @@ -46,6 +46,11 @@
     2.4  	/// Notification number
     2.5  	int		notification;
     2.6  
     2.7 +	/// Dots per inch -- print head
     2.8 +	int		dpiPrinthead;
     2.9 +	/// Dots per inch -- "label length" direction
    2.10 +	int		dpiLabel;
    2.11 +
    2.12  	/// Print parameter: autocutter enable
    2.13  	int		autocut;
    2.14  	/// Print parameter: mirror printing enable