TMF Hg

Update PTdecode to handle output from other Ptouch drivers default tip

  • Tue, 18 Mar 2014 01:27:15 +0000
  • by Philip Pemberton <philpem@philpem.me.uk> [Tue, 18 Mar 2014 01:27:15 +0000] rev 23
  • Update PTdecode to handle output from other Ptouch drivers

test app now a little more interesting -- prints component box labels

  • Fri, 25 Sep 2009 10:51:24 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Fri, 25 Sep 2009 10:51:24 +0100] rev 22
  • test app now a little more interesting -- prints component box labels

added dots-per-inch to status readback

  • Fri, 25 Sep 2009 10:50:44 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Fri, 25 Sep 2009 10:50:44 +0100] rev 21
  • added dots-per-inch to status readback

remove accidentally-included debug code (oops!)

  • Thu, 24 Sep 2009 22:29:12 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Thu, 24 Sep 2009 22:29:12 +0100] rev 20
  • remove accidentally-included debug code (oops!)

Added support for separator ticks between labels

  • Thu, 24 Sep 2009 17:18:28 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Thu, 24 Sep 2009 17:18:28 +0100] rev 19
  • Added support for separator ticks between labels

updated README

  • Wed, 05 Aug 2009 17:32:05 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 17:32:05 +0100] rev 18
  • updated README

add README

  • Wed, 05 Aug 2009 17:10:56 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 17:10:56 +0100] rev 17
  • add README

Tweaks to comments to make Doxygen happier...

  • Wed, 05 Aug 2009 16:03:03 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 16:03:03 +0100] rev 16
  • Tweaks to comments to make Doxygen happier...

multiple fixes -- now prints successfully to a PT-2450DX.

  • Wed, 05 Aug 2009 15:15:47 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 15:15:47 +0100] rev 15
  • multiple fixes -- now prints successfully to a PT-2450DX.
    FIX: job options were being set in GetStatus, now moved to their rightful home in Initialise()
    REFACTOR: small mods to structure of Initialise, now uses PT_ERR_* consts, calls pt_Close on failure, exit logic slightly changed.
    FIX: debug options should NOT have been set in Hg source (especially SKIP_STATUS_READBACK), now fixed.

Fixed printing so uncompressed mode is no longer used; now sends an uncompressed Packbits stream instead.

  • Wed, 05 Aug 2009 15:04:55 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 15:04:55 +0100] rev 14
  • Fixed printing so uncompressed mode is no longer used; now sends an uncompressed Packbits stream instead.
    Added SetOption and GetOption, so can now turn autocut and mirror on and off. Defaults to both off after init.

PTdecode: add support for uncompressed data (NOTE: *NOT* supported by the PT-2450DX)

  • Wed, 05 Aug 2009 15:02:31 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 15:02:31 +0100] rev 13
  • PTdecode: add support for uncompressed data (NOTE: *NOT* supported by the PT-2450DX)

small changes to hexdump code to stop a gcc warning on platforms where sizeof(int) != sizeof(int*) e.g. x86_64

  • Wed, 05 Aug 2009 15:00:54 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Wed, 05 Aug 2009 15:00:54 +0100] rev 12
  • small changes to hexdump code to stop a gcc warning on platforms where sizeof(int) != sizeof(int*) e.g. x86_64

added dep/*.d and obj/*.o to hgignore

  • Mon, 03 Aug 2009 23:41:04 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 23:41:04 +0100] rev 11
  • added dep/*.d and obj/*.o to hgignore

add basic test routine for Ptouch library

  • Mon, 03 Aug 2009 23:39:53 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 23:39:53 +0100] rev 10
  • add basic test routine for Ptouch library

1st version with printing support. Now uses Libgd for image generation functionality.

  • Mon, 03 Aug 2009 17:23:54 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 17:23:54 +0100] rev 9
  • 1st version with printing support. Now uses Libgd for image generation functionality.

remove more hg_image detritus

  • Mon, 03 Aug 2009 16:14:35 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 16:14:35 +0100] rev 8
  • remove more hg_image detritus

remove pt_image (will be adding libgd soon)

  • Mon, 03 Aug 2009 16:13:27 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 16:13:27 +0100] rev 7
  • remove pt_image (will be adding libgd soon)

added keepme for ptdecode obj directory

  • Mon, 03 Aug 2009 14:21:23 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 14:21:23 +0100] rev 6
  • added keepme for ptdecode obj directory

added P-touch decoder source

  • Mon, 03 Aug 2009 14:09:20 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Mon, 03 Aug 2009 14:09:20 +0100] rev 5
  • added P-touch decoder source

update makefile

  • Sat, 01 Aug 2009 12:44:09 +0100
  • by Philip Pemberton <philpem@philpem.me.uk> [Sat, 01 Aug 2009 12:44:09 +0100] rev 4
  • update makefile