Mon, 03 Aug 2009 16:14:35 +0100
remove more hg_image detritus
| philpem@3 | 1 | /************************** |
| philpem@3 | 2 | * P-Touch PT-2450DX printer driver |
| philpem@3 | 3 | * |
| philpem@3 | 4 | * P. Pemberton, 2009 |
| philpem@3 | 5 | * |
| philpem@3 | 6 | * Specs: |
| philpem@3 | 7 | * Printer head is 128 dots, 180dpi, for a total print area of ~18mm vertical |
| philpem@3 | 8 | * by however long your TZ label tape is. |
| philpem@3 | 9 | * Printhead size is (128/180)=0.711[.] inches, or 18.0622[.] mm |
| philpem@3 | 10 | * Each dot is (18.062/128) = 0.1411[.] mm |
| philpem@3 | 11 | * Printable area is (numdots * 0.1411) mm |
| philpem@3 | 12 | * |
| philpem@3 | 13 | * Tape width Margins Printable area |
| philpem@3 | 14 | * mm dots mm dots mm dots |
| philpem@3 | 15 | * 6mm 42 1.0mm 7 4mm 28 |
| philpem@3 | 16 | * 9mm 63 1.0mm 7 7mm 49 |
| philpem@3 | 17 | * 12mm 85 2.0mm 14 8mm 57 |
| philpem@3 | 18 | * 18mm 127 3.0mm 21 12mm 85 |
| philpem@3 | 19 | * 24mm 170 3.0mm 128 18mm 128 *** |
| philpem@3 | 20 | * |
| philpem@3 | 21 | * 24mm is slightly odd. Because the printhead is only 128 dots (18mm), the |
| philpem@3 | 22 | * margins are enforced by this, and not the driver software. It is impossible |
| philpem@3 | 23 | * to print right to the edge of a 24mm label in a PT-2450DX. |
| philpem@3 | 24 | * |
| philpem@3 | 25 | **************************/ |
| philpem@3 | 26 | |
| philpem@0 | 27 | #include <stdio.h> |
| philpem@0 | 28 | #include <stdlib.h> |
| philpem@3 | 29 | #include "ptouch.h" |
| philpem@0 | 30 | |
| philpem@3 | 31 | /****************************************************************************/ |
| philpem@0 | 32 | |
| philpem@0 | 33 | int main(int argc, char **argv) |
| philpem@0 | 34 | { |
| philpem@3 | 35 | pt_Device *dev; |
| philpem@3 | 36 | |
| philpem@0 | 37 | // check command line args |
| philpem@0 | 38 | if (argc < 2) { |
| philpem@0 | 39 | printf("ERROR: must specify device name\n"); |
| philpem@0 | 40 | return -1; |
| philpem@0 | 41 | } |
| philpem@0 | 42 | |
| philpem@3 | 43 | // Open and initialise the printer |
| philpem@3 | 44 | dev = pt_Initialise(argv[1]); |
| philpem@3 | 45 | |
| philpem@3 | 46 | if (dev == NULL) { |
| philpem@3 | 47 | printf("Error opening printer device.\n"); |
| philpem@0 | 48 | return -1; |
| philpem@0 | 49 | } |
| philpem@0 | 50 | |
| philpem@3 | 51 | // Close the printer device |
| philpem@3 | 52 | pt_Close(dev); |
| philpem@0 | 53 | |
| philpem@0 | 54 | return 0; |
| philpem@0 | 55 | } |