1.1 diff -r 5edfbd3e7a46 -r 1204ebf9340d PTdecode/CImg-1.3.0/html/CImg.doxygen 1.2 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 1.3 +++ b/PTdecode/CImg-1.3.0/html/CImg.doxygen Mon Aug 03 14:09:20 2009 +0100 1.4 @@ -0,0 +1,1473 @@ 1.5 +# Doxyfile 1.5.7.1 1.6 + 1.7 +# This file describes the settings to be used by the documentation system 1.8 +# doxygen (www.doxygen.org) for a project 1.9 +# 1.10 +# All text after a hash (#) is considered a comment and will be ignored 1.11 +# The format is: 1.12 +# TAG = value [value, ...] 1.13 +# For lists items can also be appended using: 1.14 +# TAG += value [value, ...] 1.15 +# Values that contain spaces should be placed between quotes (" ") 1.16 + 1.17 +#--------------------------------------------------------------------------- 1.18 +# Project related configuration options 1.19 +#--------------------------------------------------------------------------- 1.20 + 1.21 +# This tag specifies the encoding used for all characters in the config file 1.22 +# that follow. The default is UTF-8 which is also the encoding used for all 1.23 +# text before the first occurrence of this tag. Doxygen uses libiconv (or the 1.24 +# iconv built into libc) for the transcoding. See 1.25 +# http://www.gnu.org/software/libiconv for the list of possible encodings. 1.26 + 1.27 +DOXYFILE_ENCODING = UTF-8 1.28 + 1.29 +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 1.30 +# by quotes) that should identify the project. 1.31 + 1.32 +PROJECT_NAME = The CImg Library 1.33 + 1.34 +# The PROJECT_NUMBER tag can be used to enter a project or revision number. 1.35 +# This could be handy for archiving the generated documentation or 1.36 +# if some version control system is used. 1.37 + 1.38 +PROJECT_NUMBER = 1.3.0 1.39 + 1.40 +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 1.41 +# base path where the generated documentation will be put. 1.42 +# If a relative path is entered, it will be relative to the location 1.43 +# where doxygen was started. If left blank the current directory will be used. 1.44 + 1.45 +OUTPUT_DIRECTORY = 1.46 + 1.47 +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 1.48 +# 4096 sub-directories (in 2 levels) under the output directory of each output 1.49 +# format and will distribute the generated files over these directories. 1.50 +# Enabling this option can be useful when feeding doxygen a huge amount of 1.51 +# source files, where putting all generated files in the same directory would 1.52 +# otherwise cause performance problems for the file system. 1.53 + 1.54 +CREATE_SUBDIRS = NO 1.55 + 1.56 +# The OUTPUT_LANGUAGE tag is used to specify the language in which all 1.57 +# documentation generated by doxygen is written. Doxygen will use this 1.58 +# information to generate all constant output in the proper language. 1.59 +# The default language is English, other supported languages are: 1.60 +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 1.61 +# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, 1.62 +# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), 1.63 +# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, 1.64 +# Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene, 1.65 +# Spanish, Swedish, and Ukrainian. 1.66 + 1.67 +OUTPUT_LANGUAGE = English 1.68 + 1.69 +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 1.70 +# include brief member descriptions after the members that are listed in 1.71 +# the file and class documentation (similar to JavaDoc). 1.72 +# Set to NO to disable this. 1.73 + 1.74 +BRIEF_MEMBER_DESC = YES 1.75 + 1.76 +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 1.77 +# the brief description of a member or function before the detailed description. 1.78 +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 1.79 +# brief descriptions will be completely suppressed. 1.80 + 1.81 +REPEAT_BRIEF = YES 1.82 + 1.83 +# This tag implements a quasi-intelligent brief description abbreviator 1.84 +# that is used to form the text in various listings. Each string 1.85 +# in this list, if found as the leading text of the brief description, will be 1.86 +# stripped from the text and the result after processing the whole list, is 1.87 +# used as the annotated text. Otherwise, the brief description is used as-is. 1.88 +# If left blank, the following values are used ("$name" is automatically 1.89 +# replaced with the name of the entity): "The $name class" "The $name widget" 1.90 +# "The $name file" "is" "provides" "specifies" "contains" 1.91 +# "represents" "a" "an" "the" 1.92 + 1.93 +ABBREVIATE_BRIEF = 1.94 + 1.95 +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 1.96 +# Doxygen will generate a detailed section even if there is only a brief 1.97 +# description. 1.98 + 1.99 +ALWAYS_DETAILED_SEC = NO 1.100 + 1.101 +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 1.102 +# inherited members of a class in the documentation of that class as if those 1.103 +# members were ordinary class members. Constructors, destructors and assignment 1.104 +# operators of the base classes will not be shown. 1.105 + 1.106 +INLINE_INHERITED_MEMB = NO 1.107 + 1.108 +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 1.109 +# path before files name in the file list and in the header files. If set 1.110 +# to NO the shortest path that makes the file name unique will be used. 1.111 + 1.112 +FULL_PATH_NAMES = NO 1.113 + 1.114 +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 1.115 +# can be used to strip a user-defined part of the path. Stripping is 1.116 +# only done if one of the specified strings matches the left-hand part of 1.117 +# the path. The tag can be used to show relative paths in the file list. 1.118 +# If left blank the directory from which doxygen is run is used as the 1.119 +# path to strip. 1.120 + 1.121 +STRIP_FROM_PATH = 1.122 + 1.123 +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 1.124 +# the path mentioned in the documentation of a class, which tells 1.125 +# the reader which header file to include in order to use a class. 1.126 +# If left blank only the name of the header file containing the class 1.127 +# definition is used. Otherwise one should specify the include paths that 1.128 +# are normally passed to the compiler using the -I flag. 1.129 + 1.130 +STRIP_FROM_INC_PATH = 1.131 + 1.132 +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 1.133 +# (but less readable) file names. This can be useful is your file systems 1.134 +# doesn't support long names like on DOS, Mac, or CD-ROM. 1.135 + 1.136 +SHORT_NAMES = NO 1.137 + 1.138 +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 1.139 +# will interpret the first line (until the first dot) of a JavaDoc-style 1.140 +# comment as the brief description. If set to NO, the JavaDoc 1.141 +# comments will behave just like regular Qt-style comments 1.142 +# (thus requiring an explicit @brief command for a brief description.) 1.143 + 1.144 +JAVADOC_AUTOBRIEF = NO 1.145 + 1.146 +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 1.147 +# interpret the first line (until the first dot) of a Qt-style 1.148 +# comment as the brief description. If set to NO, the comments 1.149 +# will behave just like regular Qt-style comments (thus requiring 1.150 +# an explicit \brief command for a brief description.) 1.151 + 1.152 +QT_AUTOBRIEF = NO 1.153 + 1.154 +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 1.155 +# treat a multi-line C++ special comment block (i.e. a block of //! or /// 1.156 +# comments) as a brief description. This used to be the default behaviour. 1.157 +# The new default is to treat a multi-line C++ comment block as a detailed 1.158 +# description. Set this tag to YES if you prefer the old behaviour instead. 1.159 + 1.160 +MULTILINE_CPP_IS_BRIEF = YES 1.161 + 1.162 +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 1.163 +# member inherits the documentation from any documented member that it 1.164 +# re-implements. 1.165 + 1.166 +INHERIT_DOCS = YES 1.167 + 1.168 +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 1.169 +# a new page for each member. If set to NO, the documentation of a member will 1.170 +# be part of the file/class/namespace that contains it. 1.171 + 1.172 +SEPARATE_MEMBER_PAGES = NO 1.173 + 1.174 +# The TAB_SIZE tag can be used to set the number of spaces in a tab. 1.175 +# Doxygen uses this value to replace tabs by spaces in code fragments. 1.176 + 1.177 +TAB_SIZE = 8 1.178 + 1.179 +# This tag can be used to specify a number of aliases that acts 1.180 +# as commands in the documentation. An alias has the form "name=value". 1.181 +# For example adding "sideeffect=\par Side Effects:\n" will allow you to 1.182 +# put the command \sideeffect (or @sideeffect) in the documentation, which 1.183 +# will result in a user-defined paragraph with heading "Side Effects:". 1.184 +# You can put \n's in the value part of an alias to insert newlines. 1.185 + 1.186 +ALIASES = 1.187 + 1.188 +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 1.189 +# sources only. Doxygen will then generate output that is more tailored for C. 1.190 +# For instance, some of the names that are used will be different. The list 1.191 +# of all members will be omitted, etc. 1.192 + 1.193 +OPTIMIZE_OUTPUT_FOR_C = NO 1.194 + 1.195 +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 1.196 +# sources only. Doxygen will then generate output that is more tailored for 1.197 +# Java. For instance, namespaces will be presented as packages, qualified 1.198 +# scopes will look different, etc. 1.199 + 1.200 +OPTIMIZE_OUTPUT_JAVA = NO 1.201 + 1.202 +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 1.203 +# sources only. Doxygen will then generate output that is more tailored for 1.204 +# Fortran. 1.205 + 1.206 +OPTIMIZE_FOR_FORTRAN = NO 1.207 + 1.208 +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 1.209 +# sources. Doxygen will then generate output that is tailored for 1.210 +# VHDL. 1.211 + 1.212 +OPTIMIZE_OUTPUT_VHDL = NO 1.213 + 1.214 +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 1.215 +# to include (a tag file for) the STL sources as input, then you should 1.216 +# set this tag to YES in order to let doxygen match functions declarations and 1.217 +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 1.218 +# func(std::string) {}). This also make the inheritance and collaboration 1.219 +# diagrams that involve STL classes more complete and accurate. 1.220 + 1.221 +BUILTIN_STL_SUPPORT = NO 1.222 + 1.223 +# If you use Microsoft's C++/CLI language, you should set this option to YES to 1.224 +# enable parsing support. 1.225 + 1.226 +CPP_CLI_SUPPORT = NO 1.227 + 1.228 +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 1.229 +# Doxygen will parse them like normal C++ but will assume all classes use public 1.230 +# instead of private inheritance when no explicit protection keyword is present. 1.231 + 1.232 +SIP_SUPPORT = NO 1.233 + 1.234 +# For Microsoft's IDL there are propget and propput attributes to indicate getter 1.235 +# and setter methods for a property. Setting this option to YES (the default) 1.236 +# will make doxygen to replace the get and set methods by a property in the 1.237 +# documentation. This will only work if the methods are indeed getting or 1.238 +# setting a simple type. If this is not the case, or you want to show the 1.239 +# methods anyway, you should set this option to NO. 1.240 + 1.241 +IDL_PROPERTY_SUPPORT = YES 1.242 + 1.243 +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 1.244 +# tag is set to YES, then doxygen will reuse the documentation of the first 1.245 +# member in the group (if any) for the other members of the group. By default 1.246 +# all members of a group must be documented explicitly. 1.247 + 1.248 +DISTRIBUTE_GROUP_DOC = NO 1.249 + 1.250 +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 1.251 +# the same type (for instance a group of public functions) to be put as a 1.252 +# subgroup of that type (e.g. under the Public Functions section). Set it to 1.253 +# NO to prevent subgrouping. Alternatively, this can be done per class using 1.254 +# the \nosubgrouping command. 1.255 + 1.256 +SUBGROUPING = YES 1.257 + 1.258 +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 1.259 +# is documented as struct, union, or enum with the name of the typedef. So 1.260 +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 1.261 +# with name TypeT. When disabled the typedef will appear as a member of a file, 1.262 +# namespace, or class. And the struct will be named TypeS. This can typically 1.263 +# be useful for C code in case the coding convention dictates that all compound 1.264 +# types are typedef'ed and only the typedef is referenced, never the tag name. 1.265 + 1.266 +TYPEDEF_HIDES_STRUCT = NO 1.267 + 1.268 +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 1.269 +# determine which symbols to keep in memory and which to flush to disk. 1.270 +# When the cache is full, less often used symbols will be written to disk. 1.271 +# For small to medium size projects (<1000 input files) the default value is 1.272 +# probably good enough. For larger projects a too small cache size can cause 1.273 +# doxygen to be busy swapping symbols to and from disk most of the time 1.274 +# causing a significant performance penality. 1.275 +# If the system has enough physical memory increasing the cache will improve the 1.276 +# performance by keeping more symbols in memory. Note that the value works on 1.277 +# a logarithmic scale so increasing the size by one will rougly double the 1.278 +# memory usage. The cache size is given by this formula: 1.279 +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 1.280 +# corresponding to a cache size of 2^16 = 65536 symbols 1.281 + 1.282 +SYMBOL_CACHE_SIZE = 0 1.283 + 1.284 +#--------------------------------------------------------------------------- 1.285 +# Build related configuration options 1.286 +#--------------------------------------------------------------------------- 1.287 + 1.288 +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 1.289 +# documentation are documented, even if no documentation was available. 1.290 +# Private class members and static file members will be hidden unless 1.291 +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES 1.292 + 1.293 +EXTRACT_ALL = NO 1.294 + 1.295 +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 1.296 +# will be included in the documentation. 1.297 + 1.298 +EXTRACT_PRIVATE = NO 1.299 + 1.300 +# If the EXTRACT_STATIC tag is set to YES all static members of a file 1.301 +# will be included in the documentation. 1.302 + 1.303 +EXTRACT_STATIC = NO 1.304 + 1.305 +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 1.306 +# defined locally in source files will be included in the documentation. 1.307 +# If set to NO only classes defined in header files are included. 1.308 + 1.309 +EXTRACT_LOCAL_CLASSES = NO 1.310 + 1.311 +# This flag is only useful for Objective-C code. When set to YES local 1.312 +# methods, which are defined in the implementation section but not in 1.313 +# the interface are included in the documentation. 1.314 +# If set to NO (the default) only methods in the interface are included. 1.315 + 1.316 +EXTRACT_LOCAL_METHODS = NO 1.317 + 1.318 +# If this flag is set to YES, the members of anonymous namespaces will be 1.319 +# extracted and appear in the documentation as a namespace called 1.320 +# 'anonymous_namespace{file}', where file will be replaced with the base 1.321 +# name of the file that contains the anonymous namespace. By default 1.322 +# anonymous namespace are hidden. 1.323 + 1.324 +EXTRACT_ANON_NSPACES = NO 1.325 + 1.326 +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 1.327 +# undocumented members of documented classes, files or namespaces. 1.328 +# If set to NO (the default) these members will be included in the 1.329 +# various overviews, but no documentation section is generated. 1.330 +# This option has no effect if EXTRACT_ALL is enabled. 1.331 + 1.332 +HIDE_UNDOC_MEMBERS = YES 1.333 + 1.334 +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 1.335 +# undocumented classes that are normally visible in the class hierarchy. 1.336 +# If set to NO (the default) these classes will be included in the various 1.337 +# overviews. This option has no effect if EXTRACT_ALL is enabled. 1.338 + 1.339 +HIDE_UNDOC_CLASSES = YES 1.340 + 1.341 +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 1.342 +# friend (class|struct|union) declarations. 1.343 +# If set to NO (the default) these declarations will be included in the 1.344 +# documentation. 1.345 + 1.346 +HIDE_FRIEND_COMPOUNDS = NO 1.347 + 1.348 +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 1.349 +# documentation blocks found inside the body of a function. 1.350 +# If set to NO (the default) these blocks will be appended to the 1.351 +# function's detailed documentation block. 1.352 + 1.353 +HIDE_IN_BODY_DOCS = NO 1.354 + 1.355 +# The INTERNAL_DOCS tag determines if documentation 1.356 +# that is typed after a \internal command is included. If the tag is set 1.357 +# to NO (the default) then the documentation will be excluded. 1.358 +# Set it to YES to include the internal documentation. 1.359 + 1.360 +INTERNAL_DOCS = NO 1.361 + 1.362 +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 1.363 +# file names in lower-case letters. If set to YES upper-case letters are also 1.364 +# allowed. This is useful if you have classes or files whose names only differ 1.365 +# in case and if your file system supports case sensitive file names. Windows 1.366 +# and Mac users are advised to set this option to NO. 1.367 + 1.368 +CASE_SENSE_NAMES = YES 1.369 + 1.370 +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 1.371 +# will show members with their full class and namespace scopes in the 1.372 +# documentation. If set to YES the scope will be hidden. 1.373 + 1.374 +HIDE_SCOPE_NAMES = YES 1.375 + 1.376 +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 1.377 +# will put a list of the files that are included by a file in the documentation 1.378 +# of that file. 1.379 + 1.380 +SHOW_INCLUDE_FILES = NO 1.381 + 1.382 +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 1.383 +# is inserted in the documentation for inline members. 1.384 + 1.385 +INLINE_INFO = YES 1.386 + 1.387 +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 1.388 +# will sort the (detailed) documentation of file and class members 1.389 +# alphabetically by member name. If set to NO the members will appear in 1.390 +# declaration order. 1.391 + 1.392 +SORT_MEMBER_DOCS = NO 1.393 + 1.394 +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 1.395 +# brief documentation of file, namespace and class members alphabetically 1.396 +# by member name. If set to NO (the default) the members will appear in 1.397 +# declaration order. 1.398 + 1.399 +SORT_BRIEF_DOCS = NO 1.400 + 1.401 +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 1.402 +# hierarchy of group names into alphabetical order. If set to NO (the default) 1.403 +# the group names will appear in their defined order. 1.404 + 1.405 +SORT_GROUP_NAMES = NO 1.406 + 1.407 +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 1.408 +# sorted by fully-qualified names, including namespaces. If set to 1.409 +# NO (the default), the class list will be sorted only by class name, 1.410 +# not including the namespace part. 1.411 +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 1.412 +# Note: This option applies only to the class list, not to the 1.413 +# alphabetical list. 1.414 + 1.415 +SORT_BY_SCOPE_NAME = NO 1.416 + 1.417 +# The GENERATE_TODOLIST tag can be used to enable (YES) or 1.418 +# disable (NO) the todo list. This list is created by putting \todo 1.419 +# commands in the documentation. 1.420 + 1.421 +GENERATE_TODOLIST = NO 1.422 + 1.423 +# The GENERATE_TESTLIST tag can be used to enable (YES) or 1.424 +# disable (NO) the test list. This list is created by putting \test 1.425 +# commands in the documentation. 1.426 + 1.427 +GENERATE_TESTLIST = NO 1.428 + 1.429 +# The GENERATE_BUGLIST tag can be used to enable (YES) or 1.430 +# disable (NO) the bug list. This list is created by putting \bug 1.431 +# commands in the documentation. 1.432 + 1.433 +GENERATE_BUGLIST = NO 1.434 + 1.435 +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 1.436 +# disable (NO) the deprecated list. This list is created by putting 1.437 +# \deprecated commands in the documentation. 1.438 + 1.439 +GENERATE_DEPRECATEDLIST= NO 1.440 + 1.441 +# The ENABLED_SECTIONS tag can be used to enable conditional 1.442 +# documentation sections, marked by \if sectionname ... \endif. 1.443 + 1.444 +ENABLED_SECTIONS = 1.445 + 1.446 +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 1.447 +# the initial value of a variable or define consists of for it to appear in 1.448 +# the documentation. If the initializer consists of more lines than specified 1.449 +# here it will be hidden. Use a value of 0 to hide initializers completely. 1.450 +# The appearance of the initializer of individual variables and defines in the 1.451 +# documentation can be controlled using \showinitializer or \hideinitializer 1.452 +# command in the documentation regardless of this setting. 1.453 + 1.454 +MAX_INITIALIZER_LINES = 30 1.455 + 1.456 +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 1.457 +# at the bottom of the documentation of classes and structs. If set to YES the 1.458 +# list will mention the files that were used to generate the documentation. 1.459 + 1.460 +SHOW_USED_FILES = NO 1.461 + 1.462 +# If the sources in your project are distributed over multiple directories 1.463 +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 1.464 +# in the documentation. The default is NO. 1.465 + 1.466 +SHOW_DIRECTORIES = NO 1.467 + 1.468 +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. 1.469 +# This will remove the Files entry from the Quick Index and from the 1.470 +# Folder Tree View (if specified). The default is YES. 1.471 + 1.472 +SHOW_FILES = NO 1.473 + 1.474 +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the 1.475 +# Namespaces page. This will remove the Namespaces entry from the Quick Index 1.476 +# and from the Folder Tree View (if specified). The default is YES. 1.477 + 1.478 +SHOW_NAMESPACES = YES 1.479 + 1.480 +# The FILE_VERSION_FILTER tag can be used to specify a program or script that 1.481 +# doxygen should invoke to get the current version for each file (typically from 1.482 +# the version control system). Doxygen will invoke the program by executing (via 1.483 +# popen()) the command <command> <input-file>, where <command> is the value of 1.484 +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 1.485 +# provided by doxygen. Whatever the program writes to standard output 1.486 +# is used as the file version. See the manual for examples. 1.487 + 1.488 +FILE_VERSION_FILTER = 1.489 + 1.490 +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by 1.491 +# doxygen. The layout file controls the global structure of the generated output files 1.492 +# in an output format independent way. The create the layout file that represents 1.493 +# doxygen's defaults, run doxygen with the -l option. You can optionally specify a 1.494 +# file name after the option, if omitted DoxygenLayout.xml will be used as the name 1.495 +# of the layout file. 1.496 + 1.497 +LAYOUT_FILE = 1.498 + 1.499 +#--------------------------------------------------------------------------- 1.500 +# configuration options related to warning and progress messages 1.501 +#--------------------------------------------------------------------------- 1.502 + 1.503 +# The QUIET tag can be used to turn on/off the messages that are generated 1.504 +# by doxygen. Possible values are YES and NO. If left blank NO is used. 1.505 + 1.506 +QUIET = NO 1.507 + 1.508 +# The WARNINGS tag can be used to turn on/off the warning messages that are 1.509 +# generated by doxygen. Possible values are YES and NO. If left blank 1.510 +# NO is used. 1.511 + 1.512 +WARNINGS = YES 1.513 + 1.514 +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 1.515 +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 1.516 +# automatically be disabled. 1.517 + 1.518 +WARN_IF_UNDOCUMENTED = YES 1.519 + 1.520 +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 1.521 +# potential errors in the documentation, such as not documenting some 1.522 +# parameters in a documented function, or documenting parameters that 1.523 +# don't exist or using markup commands wrongly. 1.524 + 1.525 +WARN_IF_DOC_ERROR = YES 1.526 + 1.527 +# This WARN_NO_PARAMDOC option can be abled to get warnings for 1.528 +# functions that are documented, but have no documentation for their parameters 1.529 +# or return value. If set to NO (the default) doxygen will only warn about 1.530 +# wrong or incomplete parameter documentation, but not about the absence of 1.531 +# documentation. 1.532 + 1.533 +WARN_NO_PARAMDOC = NO 1.534 + 1.535 +# The WARN_FORMAT tag determines the format of the warning messages that 1.536 +# doxygen can produce. The string should contain the $file, $line, and $text 1.537 +# tags, which will be replaced by the file and line number from which the 1.538 +# warning originated and the warning text. Optionally the format may contain 1.539 +# $version, which will be replaced by the version of the file (if it could 1.540 +# be obtained via FILE_VERSION_FILTER) 1.541 + 1.542 +WARN_FORMAT = "$file:$line: $text" 1.543 + 1.544 +# The WARN_LOGFILE tag can be used to specify a file to which warning 1.545 +# and error messages should be written. If left blank the output is written 1.546 +# to stderr. 1.547 + 1.548 +WARN_LOGFILE = 1.549 + 1.550 +#--------------------------------------------------------------------------- 1.551 +# configuration options related to the input files 1.552 +#--------------------------------------------------------------------------- 1.553 + 1.554 +# The INPUT tag can be used to specify the files and/or directories that contain 1.555 +# documented source files. You may enter file names like "myfile.cpp" or 1.556 +# directories like "/usr/src/myproject". Separate the files or directories 1.557 +# with spaces. 1.558 + 1.559 +INPUT =../CImg.h CImg_documentation.h 1.560 + 1.561 +# This tag can be used to specify the character encoding of the source files 1.562 +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 1.563 +# also the default input encoding. Doxygen uses libiconv (or the iconv built 1.564 +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 1.565 +# the list of possible encodings. 1.566 + 1.567 +INPUT_ENCODING = UTF-8 1.568 + 1.569 +# If the value of the INPUT tag contains directories, you can use the 1.570 +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 1.571 +# and *.h) to filter out the source-files in the directories. If left 1.572 +# blank the following patterns are tested: 1.573 +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 1.574 +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 1.575 + 1.576 +FILE_PATTERNS = 1.577 + 1.578 +# The RECURSIVE tag can be used to turn specify whether or not subdirectories 1.579 +# should be searched for input files as well. Possible values are YES and NO. 1.580 +# If left blank NO is used. 1.581 + 1.582 +RECURSIVE = NO 1.583 + 1.584 +# The EXCLUDE tag can be used to specify files and/or directories that should 1.585 +# excluded from the INPUT source files. This way you can easily exclude a 1.586 +# subdirectory from a directory tree whose root is specified with the INPUT tag. 1.587 + 1.588 +EXCLUDE = 1.589 + 1.590 +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 1.591 +# directories that are symbolic links (a Unix filesystem feature) are excluded 1.592 +# from the input. 1.593 + 1.594 +EXCLUDE_SYMLINKS = NO 1.595 + 1.596 +# If the value of the INPUT tag contains directories, you can use the 1.597 +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 1.598 +# certain files from those directories. Note that the wildcards are matched 1.599 +# against the file with absolute path, so to exclude all test directories 1.600 +# for example use the pattern */test/* 1.601 + 1.602 +EXCLUDE_PATTERNS = 1.603 + 1.604 +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 1.605 +# (namespaces, classes, functions, etc.) that should be excluded from the 1.606 +# output. The symbol name can be a fully qualified name, a word, or if the 1.607 +# wildcard * is used, a substring. Examples: ANamespace, AClass, 1.608 +# AClass::ANamespace, ANamespace::*Test 1.609 + 1.610 +EXCLUDE_SYMBOLS = 1.611 + 1.612 +# The EXAMPLE_PATH tag can be used to specify one or more files or 1.613 +# directories that contain example code fragments that are included (see 1.614 +# the \include command). 1.615 + 1.616 +EXAMPLE_PATH = 1.617 + 1.618 +# If the value of the EXAMPLE_PATH tag contains directories, you can use the 1.619 +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 1.620 +# and *.h) to filter out the source-files in the directories. If left 1.621 +# blank all files are included. 1.622 + 1.623 +EXAMPLE_PATTERNS = 1.624 + 1.625 +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 1.626 +# searched for input files to be used with the \include or \dontinclude 1.627 +# commands irrespective of the value of the RECURSIVE tag. 1.628 +# Possible values are YES and NO. If left blank NO is used. 1.629 + 1.630 +EXAMPLE_RECURSIVE = NO 1.631 + 1.632 +# The IMAGE_PATH tag can be used to specify one or more files or 1.633 +# directories that contain image that are included in the documentation (see 1.634 +# the \image command). 1.635 + 1.636 +IMAGE_PATH = 1.637 + 1.638 +# The INPUT_FILTER tag can be used to specify a program that doxygen should 1.639 +# invoke to filter for each input file. Doxygen will invoke the filter program 1.640 +# by executing (via popen()) the command <filter> <input-file>, where <filter> 1.641 +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 1.642 +# input file. Doxygen will then use the output that the filter program writes 1.643 +# to standard output. If FILTER_PATTERNS is specified, this tag will be 1.644 +# ignored. 1.645 + 1.646 +INPUT_FILTER = 1.647 + 1.648 +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 1.649 +# basis. Doxygen will compare the file name with each pattern and apply the 1.650 +# filter if there is a match. The filters are a list of the form: 1.651 +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 1.652 +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 1.653 +# is applied to all files. 1.654 + 1.655 +FILTER_PATTERNS = 1.656 + 1.657 +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 1.658 +# INPUT_FILTER) will be used to filter the input files when producing source 1.659 +# files to browse (i.e. when SOURCE_BROWSER is set to YES). 1.660 + 1.661 +FILTER_SOURCE_FILES = NO 1.662 + 1.663 +#--------------------------------------------------------------------------- 1.664 +# configuration options related to source browsing 1.665 +#--------------------------------------------------------------------------- 1.666 + 1.667 +# If the SOURCE_BROWSER tag is set to YES then a list of source files will 1.668 +# be generated. Documented entities will be cross-referenced with these sources. 1.669 +# Note: To get rid of all source code in the generated output, make sure also 1.670 +# VERBATIM_HEADERS is set to NO. 1.671 + 1.672 +SOURCE_BROWSER = NO 1.673 + 1.674 +# Setting the INLINE_SOURCES tag to YES will include the body 1.675 +# of functions and classes directly in the documentation. 1.676 + 1.677 +INLINE_SOURCES = NO 1.678 + 1.679 +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 1.680 +# doxygen to hide any special comment blocks from generated source code 1.681 +# fragments. Normal C and C++ comments will always remain visible. 1.682 + 1.683 +STRIP_CODE_COMMENTS = YES 1.684 + 1.685 +# If the REFERENCED_BY_RELATION tag is set to YES 1.686 +# then for each documented function all documented 1.687 +# functions referencing it will be listed. 1.688 + 1.689 +REFERENCED_BY_RELATION = NO 1.690 + 1.691 +# If the REFERENCES_RELATION tag is set to YES 1.692 +# then for each documented function all documented entities 1.693 +# called/used by that function will be listed. 1.694 + 1.695 +REFERENCES_RELATION = NO 1.696 + 1.697 +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 1.698 +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 1.699 +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 1.700 +# link to the source code. Otherwise they will link to the documentstion. 1.701 + 1.702 +REFERENCES_LINK_SOURCE = YES 1.703 + 1.704 +# If the USE_HTAGS tag is set to YES then the references to source code 1.705 +# will point to the HTML generated by the htags(1) tool instead of doxygen 1.706 +# built-in source browser. The htags tool is part of GNU's global source 1.707 +# tagging system (see http://www.gnu.org/software/global/global.html). You 1.708 +# will need version 4.8.6 or higher. 1.709 + 1.710 +USE_HTAGS = NO 1.711 + 1.712 +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 1.713 +# will generate a verbatim copy of the header file for each class for 1.714 +# which an include is specified. Set to NO to disable this. 1.715 + 1.716 +VERBATIM_HEADERS = NO 1.717 + 1.718 +#--------------------------------------------------------------------------- 1.719 +# configuration options related to the alphabetical class index 1.720 +#--------------------------------------------------------------------------- 1.721 + 1.722 +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 1.723 +# of all compounds will be generated. Enable this if the project 1.724 +# contains a lot of classes, structs, unions or interfaces. 1.725 + 1.726 +ALPHABETICAL_INDEX = NO 1.727 + 1.728 +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 1.729 +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 1.730 +# in which this list will be split (can be a number in the range [1..20]) 1.731 + 1.732 +COLS_IN_ALPHA_INDEX = 5 1.733 + 1.734 +# In case all classes in a project start with a common prefix, all 1.735 +# classes will be put under the same header in the alphabetical index. 1.736 +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 1.737 +# should be ignored while generating the index headers. 1.738 + 1.739 +IGNORE_PREFIX = 1.740 + 1.741 +#--------------------------------------------------------------------------- 1.742 +# configuration options related to the HTML output 1.743 +#--------------------------------------------------------------------------- 1.744 + 1.745 +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 1.746 +# generate HTML output. 1.747 + 1.748 +GENERATE_HTML = YES 1.749 + 1.750 +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 1.751 +# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1.752 +# put in front of it. If left blank `html' will be used as the default path. 1.753 + 1.754 +HTML_OUTPUT = reference 1.755 + 1.756 +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 1.757 +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 1.758 +# doxygen will generate files with .html extension. 1.759 + 1.760 +HTML_FILE_EXTENSION = .html 1.761 + 1.762 +# The HTML_HEADER tag can be used to specify a personal HTML header for 1.763 +# each generated HTML page. If it is left blank doxygen will generate a 1.764 +# standard header. 1.765 + 1.766 +HTML_HEADER = header_reference.html 1.767 + 1.768 +# The HTML_FOOTER tag can be used to specify a personal HTML footer for 1.769 +# each generated HTML page. If it is left blank doxygen will generate a 1.770 +# standard footer. 1.771 + 1.772 +HTML_FOOTER = footer.html 1.773 + 1.774 +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 1.775 +# style sheet that is used by each HTML page. It can be used to 1.776 +# fine-tune the look of the HTML output. If the tag is left blank doxygen 1.777 +# will generate a default style sheet. Note that doxygen will try to copy 1.778 +# the style sheet file to the HTML output directory, so don't put your own 1.779 +# stylesheet in the HTML output directory as well, or it will be erased! 1.780 + 1.781 +HTML_STYLESHEET = 1.782 + 1.783 +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 1.784 +# files or namespaces will be aligned in HTML using tables. If set to 1.785 +# NO a bullet list will be used. 1.786 + 1.787 +HTML_ALIGN_MEMBERS = YES 1.788 + 1.789 +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 1.790 +# documentation will contain sections that can be hidden and shown after the 1.791 +# page has loaded. For this to work a browser that supports 1.792 +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 1.793 +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). 1.794 + 1.795 +HTML_DYNAMIC_SECTIONS = YES 1.796 + 1.797 +# If the GENERATE_DOCSET tag is set to YES, additional index files 1.798 +# will be generated that can be used as input for Apple's Xcode 3 1.799 +# integrated development environment, introduced with OSX 10.5 (Leopard). 1.800 +# To create a documentation set, doxygen will generate a Makefile in the 1.801 +# HTML output directory. Running make will produce the docset in that 1.802 +# directory and running "make install" will install the docset in 1.803 +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 1.804 +# it at startup. 1.805 +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. 1.806 + 1.807 +GENERATE_DOCSET = NO 1.808 + 1.809 +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 1.810 +# feed. A documentation feed provides an umbrella under which multiple 1.811 +# documentation sets from a single provider (such as a company or product suite) 1.812 +# can be grouped. 1.813 + 1.814 +DOCSET_FEEDNAME = "Doxygen generated docs" 1.815 + 1.816 +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 1.817 +# should uniquely identify the documentation set bundle. This should be a 1.818 +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 1.819 +# will append .docset to the name. 1.820 + 1.821 +DOCSET_BUNDLE_ID = org.doxygen.Project 1.822 + 1.823 +# If the GENERATE_HTMLHELP tag is set to YES, additional index files 1.824 +# will be generated that can be used as input for tools like the 1.825 +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 1.826 +# of the generated HTML documentation. 1.827 + 1.828 +GENERATE_HTMLHELP = NO 1.829 + 1.830 +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 1.831 +# be used to specify the file name of the resulting .chm file. You 1.832 +# can add a path in front of the file if the result should not be 1.833 +# written to the html output directory. 1.834 + 1.835 +CHM_FILE = 1.836 + 1.837 +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 1.838 +# be used to specify the location (absolute path including file name) of 1.839 +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 1.840 +# the HTML help compiler on the generated index.hhp. 1.841 + 1.842 +HHC_LOCATION = 1.843 + 1.844 +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 1.845 +# controls if a separate .chi index file is generated (YES) or that 1.846 +# it should be included in the master .chm file (NO). 1.847 + 1.848 +GENERATE_CHI = NO 1.849 + 1.850 +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 1.851 +# is used to encode HtmlHelp index (hhk), content (hhc) and project file 1.852 +# content. 1.853 + 1.854 +CHM_INDEX_ENCODING = 1.855 + 1.856 +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 1.857 +# controls whether a binary table of contents is generated (YES) or a 1.858 +# normal table of contents (NO) in the .chm file. 1.859 + 1.860 +BINARY_TOC = NO 1.861 + 1.862 +# The TOC_EXPAND flag can be set to YES to add extra items for group members 1.863 +# to the contents of the HTML help documentation and to the tree view. 1.864 + 1.865 +TOC_EXPAND = NO 1.866 + 1.867 +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER 1.868 +# are set, an additional index file will be generated that can be used as input for 1.869 +# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated 1.870 +# HTML documentation. 1.871 + 1.872 +GENERATE_QHP = NO 1.873 + 1.874 +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can 1.875 +# be used to specify the file name of the resulting .qch file. 1.876 +# The path specified is relative to the HTML output folder. 1.877 + 1.878 +QCH_FILE = 1.879 + 1.880 +# The QHP_NAMESPACE tag specifies the namespace to use when generating 1.881 +# Qt Help Project output. For more information please see 1.882 +# <a href="http://doc.trolltech.com/qthelpproject.html#namespace">Qt Help Project / Namespace</a>. 1.883 + 1.884 +QHP_NAMESPACE = org.doxygen.Project 1.885 + 1.886 +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 1.887 +# Qt Help Project output. For more information please see 1.888 +# <a href="http://doc.trolltech.com/qthelpproject.html#virtual-folders">Qt Help Project / Virtual Folders</a>. 1.889 + 1.890 +QHP_VIRTUAL_FOLDER = doc 1.891 + 1.892 +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 1.893 +# be used to specify the location of Qt's qhelpgenerator. 1.894 +# If non-empty doxygen will try to run qhelpgenerator on the generated 1.895 +# .qhp file . 1.896 + 1.897 +QHG_LOCATION = 1.898 + 1.899 +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 1.900 +# top of each HTML page. The value NO (the default) enables the index and 1.901 +# the value YES disables it. 1.902 + 1.903 +DISABLE_INDEX = NO 1.904 + 1.905 +# This tag can be used to set the number of enum values (range [1..20]) 1.906 +# that doxygen will group on one line in the generated HTML documentation. 1.907 + 1.908 +ENUM_VALUES_PER_LINE = 4 1.909 + 1.910 +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 1.911 +# structure should be generated to display hierarchical information. 1.912 +# If the tag value is set to FRAME, a side panel will be generated 1.913 +# containing a tree-like index structure (just like the one that 1.914 +# is generated for HTML Help). For this to work a browser that supports 1.915 +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 1.916 +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 1.917 +# probably better off using the HTML help feature. Other possible values 1.918 +# for this tag are: HIERARCHIES, which will generate the Groups, Directories, 1.919 +# and Class Hierarchy pages using a tree view instead of an ordered list; 1.920 +# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which 1.921 +# disables this behavior completely. For backwards compatibility with previous 1.922 +# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE 1.923 +# respectively. 1.924 + 1.925 +GENERATE_TREEVIEW = NONE 1.926 + 1.927 +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 1.928 +# used to set the initial width (in pixels) of the frame in which the tree 1.929 +# is shown. 1.930 + 1.931 +TREEVIEW_WIDTH = 250 1.932 + 1.933 +# Use this tag to change the font size of Latex formulas included 1.934 +# as images in the HTML documentation. The default is 10. Note that 1.935 +# when you change the font size after a successful doxygen run you need 1.936 +# to manually remove any form_*.png images from the HTML output directory 1.937 +# to force them to be regenerated. 1.938 + 1.939 +FORMULA_FONTSIZE = 10 1.940 + 1.941 +#--------------------------------------------------------------------------- 1.942 +# configuration options related to the LaTeX output 1.943 +#--------------------------------------------------------------------------- 1.944 + 1.945 +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 1.946 +# generate Latex output. 1.947 + 1.948 +GENERATE_LATEX = YES 1.949 + 1.950 +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 1.951 +# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1.952 +# put in front of it. If left blank `latex' will be used as the default path. 1.953 + 1.954 +LATEX_OUTPUT = latex 1.955 + 1.956 +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 1.957 +# invoked. If left blank `latex' will be used as the default command name. 1.958 + 1.959 +LATEX_CMD_NAME = latex 1.960 + 1.961 +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 1.962 +# generate index for LaTeX. If left blank `makeindex' will be used as the 1.963 +# default command name. 1.964 + 1.965 +MAKEINDEX_CMD_NAME = makeindex 1.966 + 1.967 +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 1.968 +# LaTeX documents. This may be useful for small projects and may help to 1.969 +# save some trees in general. 1.970 + 1.971 +COMPACT_LATEX = NO 1.972 + 1.973 +# The PAPER_TYPE tag can be used to set the paper type that is used 1.974 +# by the printer. Possible values are: a4, a4wide, letter, legal and 1.975 +# executive. If left blank a4wide will be used. 1.976 + 1.977 +PAPER_TYPE = a4wide 1.978 + 1.979 +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 1.980 +# packages that should be included in the LaTeX output. 1.981 + 1.982 +EXTRA_PACKAGES = 1.983 + 1.984 +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 1.985 +# the generated latex document. The header should contain everything until 1.986 +# the first chapter. If it is left blank doxygen will generate a 1.987 +# standard header. Notice: only use this tag if you know what you are doing! 1.988 + 1.989 +LATEX_HEADER = 1.990 + 1.991 +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 1.992 +# is prepared for conversion to pdf (using ps2pdf). The pdf file will 1.993 +# contain links (just like the HTML output) instead of page references 1.994 +# This makes the output suitable for online browsing using a pdf viewer. 1.995 + 1.996 +PDF_HYPERLINKS = YES 1.997 + 1.998 +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 1.999 +# plain latex in the generated Makefile. Set this option to YES to get a 1.1000 +# higher quality PDF documentation. 1.1001 + 1.1002 +USE_PDFLATEX = YES 1.1003 + 1.1004 +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 1.1005 +# command to the generated LaTeX files. This will instruct LaTeX to keep 1.1006 +# running if errors occur, instead of asking the user for help. 1.1007 +# This option is also used when generating formulas in HTML. 1.1008 + 1.1009 +LATEX_BATCHMODE = NO 1.1010 + 1.1011 +# If LATEX_HIDE_INDICES is set to YES then doxygen will not 1.1012 +# include the index chapters (such as File Index, Compound Index, etc.) 1.1013 +# in the output. 1.1014 + 1.1015 +LATEX_HIDE_INDICES = NO 1.1016 + 1.1017 +#--------------------------------------------------------------------------- 1.1018 +# configuration options related to the RTF output 1.1019 +#--------------------------------------------------------------------------- 1.1020 + 1.1021 +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 1.1022 +# The RTF output is optimized for Word 97 and may not look very pretty with 1.1023 +# other RTF readers or editors. 1.1024 + 1.1025 +GENERATE_RTF = NO 1.1026 + 1.1027 +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 1.1028 +# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1.1029 +# put in front of it. If left blank `rtf' will be used as the default path. 1.1030 + 1.1031 +RTF_OUTPUT = rtf 1.1032 + 1.1033 +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 1.1034 +# RTF documents. This may be useful for small projects and may help to 1.1035 +# save some trees in general. 1.1036 + 1.1037 +COMPACT_RTF = NO 1.1038 + 1.1039 +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 1.1040 +# will contain hyperlink fields. The RTF file will 1.1041 +# contain links (just like the HTML output) instead of page references. 1.1042 +# This makes the output suitable for online browsing using WORD or other 1.1043 +# programs which support those fields. 1.1044 +# Note: wordpad (write) and others do not support links. 1.1045 + 1.1046 +RTF_HYPERLINKS = NO 1.1047 + 1.1048 +# Load stylesheet definitions from file. Syntax is similar to doxygen's 1.1049 +# config file, i.e. a series of assignments. You only have to provide 1.1050 +# replacements, missing definitions are set to their default value. 1.1051 + 1.1052 +RTF_STYLESHEET_FILE = 1.1053 + 1.1054 +# Set optional variables used in the generation of an rtf document. 1.1055 +# Syntax is similar to doxygen's config file. 1.1056 + 1.1057 +RTF_EXTENSIONS_FILE = 1.1058 + 1.1059 +#--------------------------------------------------------------------------- 1.1060 +# configuration options related to the man page output 1.1061 +#--------------------------------------------------------------------------- 1.1062 + 1.1063 +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 1.1064 +# generate man pages 1.1065 + 1.1066 +GENERATE_MAN = NO 1.1067 + 1.1068 +# The MAN_OUTPUT tag is used to specify where the man pages will be put. 1.1069 +# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1.1070 +# put in front of it. If left blank `man' will be used as the default path. 1.1071 + 1.1072 +MAN_OUTPUT = man 1.1073 + 1.1074 +# The MAN_EXTENSION tag determines the extension that is added to 1.1075 +# the generated man pages (default is the subroutine's section .3) 1.1076 + 1.1077 +MAN_EXTENSION = .3 1.1078 + 1.1079 +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 1.1080 +# then it will generate one additional man file for each entity 1.1081 +# documented in the real man page(s). These additional files 1.1082 +# only source the real man page, but without them the man command 1.1083 +# would be unable to find the correct page. The default is NO. 1.1084 + 1.1085 +MAN_LINKS = NO 1.1086 + 1.1087 +#--------------------------------------------------------------------------- 1.1088 +# configuration options related to the XML output 1.1089 +#--------------------------------------------------------------------------- 1.1090 + 1.1091 +# If the GENERATE_XML tag is set to YES Doxygen will 1.1092 +# generate an XML file that captures the structure of 1.1093 +# the code including all documentation. 1.1094 + 1.1095 +GENERATE_XML = NO 1.1096 + 1.1097 +# The XML_OUTPUT tag is used to specify where the XML pages will be put. 1.1098 +# If a relative path is entered the value of OUTPUT_DIRECTORY will be 1.1099 +# put in front of it. If left blank `xml' will be used as the default path. 1.1100 + 1.1101 +XML_OUTPUT = xml 1.1102 + 1.1103 +# The XML_SCHEMA tag can be used to specify an XML schema, 1.1104 +# which can be used by a validating XML parser to check the 1.1105 +# syntax of the XML files. 1.1106 + 1.1107 +XML_SCHEMA = 1.1108 + 1.1109 +# The XML_DTD tag can be used to specify an XML DTD, 1.1110 +# which can be used by a validating XML parser to check the 1.1111 +# syntax of the XML files. 1.1112 + 1.1113 +XML_DTD = 1.1114 + 1.1115 +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 1.1116 +# dump the program listings (including syntax highlighting 1.1117 +# and cross-referencing information) to the XML output. Note that 1.1118 +# enabling this will significantly increase the size of the XML output. 1.1119 + 1.1120 +XML_PROGRAMLISTING = YES 1.1121 + 1.1122 +#--------------------------------------------------------------------------- 1.1123 +# configuration options for the AutoGen Definitions output 1.1124 +#--------------------------------------------------------------------------- 1.1125 + 1.1126 +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 1.1127 +# generate an AutoGen Definitions (see autogen.sf.net) file 1.1128 +# that captures the structure of the code including all 1.1129 +# documentation. Note that this feature is still experimental 1.1130 +# and incomplete at the moment. 1.1131 + 1.1132 +GENERATE_AUTOGEN_DEF = NO 1.1133 + 1.1134 +#--------------------------------------------------------------------------- 1.1135 +# configuration options related to the Perl module output 1.1136 +#--------------------------------------------------------------------------- 1.1137 + 1.1138 +# If the GENERATE_PERLMOD tag is set to YES Doxygen will 1.1139 +# generate a Perl module file that captures the structure of 1.1140 +# the code including all documentation. Note that this 1.1141 +# feature is still experimental and incomplete at the 1.1142 +# moment. 1.1143 + 1.1144 +GENERATE_PERLMOD = NO 1.1145 + 1.1146 +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 1.1147 +# the necessary Makefile rules, Perl scripts and LaTeX code to be able 1.1148 +# to generate PDF and DVI output from the Perl module output. 1.1149 + 1.1150 +PERLMOD_LATEX = NO 1.1151 + 1.1152 +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 1.1153 +# nicely formatted so it can be parsed by a human reader. This is useful 1.1154 +# if you want to understand what is going on. On the other hand, if this 1.1155 +# tag is set to NO the size of the Perl module output will be much smaller 1.1156 +# and Perl will parse it just the same. 1.1157 + 1.1158 +PERLMOD_PRETTY = YES 1.1159 + 1.1160 +# The names of the make variables in the generated doxyrules.make file 1.1161 +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 1.1162 +# This is useful so different doxyrules.make files included by the same 1.1163 +# Makefile don't overwrite each other's variables. 1.1164 + 1.1165 +PERLMOD_MAKEVAR_PREFIX = 1.1166 + 1.1167 +#--------------------------------------------------------------------------- 1.1168 +# Configuration options related to the preprocessor 1.1169 +#--------------------------------------------------------------------------- 1.1170 + 1.1171 +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 1.1172 +# evaluate all C-preprocessor directives found in the sources and include 1.1173 +# files. 1.1174 + 1.1175 +ENABLE_PREPROCESSING = YES 1.1176 + 1.1177 +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 1.1178 +# names in the source code. If set to NO (the default) only conditional 1.1179 +# compilation will be performed. Macro expansion can be done in a controlled 1.1180 +# way by setting EXPAND_ONLY_PREDEF to YES. 1.1181 + 1.1182 +MACRO_EXPANSION = NO 1.1183 + 1.1184 +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 1.1185 +# then the macro expansion is limited to the macros specified with the 1.1186 +# PREDEFINED and EXPAND_AS_DEFINED tags. 1.1187 + 1.1188 +EXPAND_ONLY_PREDEF = NO 1.1189 + 1.1190 +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 1.1191 +# in the INCLUDE_PATH (see below) will be search if a #include is found. 1.1192 + 1.1193 +SEARCH_INCLUDES = YES 1.1194 + 1.1195 +# The INCLUDE_PATH tag can be used to specify one or more directories that 1.1196 +# contain include files that are not input files but should be processed by 1.1197 +# the preprocessor. 1.1198 + 1.1199 +INCLUDE_PATH = 1.1200 + 1.1201 +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 1.1202 +# patterns (like *.h and *.hpp) to filter out the header-files in the 1.1203 +# directories. If left blank, the patterns specified with FILE_PATTERNS will 1.1204 +# be used. 1.1205 + 1.1206 +INCLUDE_FILE_PATTERNS = 1.1207 + 1.1208 +# The PREDEFINED tag can be used to specify one or more macro names that 1.1209 +# are defined before the preprocessor is started (similar to the -D option of 1.1210 +# gcc). The argument of the tag is a list of macros of the form: name 1.1211 +# or name=definition (no spaces). If the definition and the = are 1.1212 +# omitted =1 is assumed. To prevent a macro definition from being 1.1213 +# undefined via #undef or recursively expanded use the := operator 1.1214 +# instead of the = operator. 1.1215 + 1.1216 +PREDEFINED = 1.1217 + 1.1218 +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 1.1219 +# this tag can be used to specify a list of macro names that should be expanded. 1.1220 +# The macro definition that is found in the sources will be used. 1.1221 +# Use the PREDEFINED tag if you want to use a different macro definition. 1.1222 + 1.1223 +EXPAND_AS_DEFINED = 1.1224 + 1.1225 +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 1.1226 +# doxygen's preprocessor will remove all function-like macros that are alone 1.1227 +# on a line, have an all uppercase name, and do not end with a semicolon. Such 1.1228 +# function macros are typically used for boiler-plate code, and will confuse 1.1229 +# the parser if not removed. 1.1230 + 1.1231 +SKIP_FUNCTION_MACROS = YES 1.1232 + 1.1233 +#--------------------------------------------------------------------------- 1.1234 +# Configuration::additions related to external references 1.1235 +#--------------------------------------------------------------------------- 1.1236 + 1.1237 +# The TAGFILES option can be used to specify one or more tagfiles. 1.1238 +# Optionally an initial location of the external documentation 1.1239 +# can be added for each tagfile. The format of a tag file without 1.1240 +# this location is as follows: 1.1241 +# TAGFILES = file1 file2 ... 1.1242 +# Adding location for the tag files is done as follows: 1.1243 +# TAGFILES = file1=loc1 "file2 = loc2" ... 1.1244 +# where "loc1" and "loc2" can be relative or absolute paths or 1.1245 +# URLs. If a location is present for each tag, the installdox tool 1.1246 +# does not have to be run to correct the links. 1.1247 +# Note that each tag file must have a unique name 1.1248 +# (where the name does NOT include the path) 1.1249 +# If a tag file is not located in the directory in which doxygen 1.1250 +# is run, you must also specify the path to the tagfile here. 1.1251 + 1.1252 +TAGFILES = 1.1253 + 1.1254 +# When a file name is specified after GENERATE_TAGFILE, doxygen will create 1.1255 +# a tag file that is based on the input files it reads. 1.1256 + 1.1257 +GENERATE_TAGFILE = 1.1258 + 1.1259 +# If the ALLEXTERNALS tag is set to YES all external classes will be listed 1.1260 +# in the class index. If set to NO only the inherited external classes 1.1261 +# will be listed. 1.1262 + 1.1263 +ALLEXTERNALS = NO 1.1264 + 1.1265 +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 1.1266 +# in the modules index. If set to NO, only the current project's groups will 1.1267 +# be listed. 1.1268 + 1.1269 +EXTERNAL_GROUPS = YES 1.1270 + 1.1271 +# The PERL_PATH should be the absolute path and name of the perl script 1.1272 +# interpreter (i.e. the result of `which perl'). 1.1273 + 1.1274 +PERL_PATH = /usr/bin/perl 1.1275 + 1.1276 +#--------------------------------------------------------------------------- 1.1277 +# Configuration options related to the dot tool 1.1278 +#--------------------------------------------------------------------------- 1.1279 + 1.1280 +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 1.1281 +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 1.1282 +# or super classes. Setting the tag to NO turns the diagrams off. Note that 1.1283 +# this option is superseded by the HAVE_DOT option below. This is only a 1.1284 +# fallback. It is recommended to install and use dot, since it yields more 1.1285 +# powerful graphs. 1.1286 + 1.1287 +CLASS_DIAGRAMS = NO 1.1288 + 1.1289 +# You can define message sequence charts within doxygen comments using the \msc 1.1290 +# command. Doxygen will then run the mscgen tool (see 1.1291 +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the 1.1292 +# documentation. The MSCGEN_PATH tag allows you to specify the directory where 1.1293 +# the mscgen tool resides. If left empty the tool is assumed to be found in the 1.1294 +# default search path. 1.1295 + 1.1296 +MSCGEN_PATH = 1.1297 + 1.1298 +# If set to YES, the inheritance and collaboration graphs will hide 1.1299 +# inheritance and usage relations if the target is undocumented 1.1300 +# or is not a class. 1.1301 + 1.1302 +HIDE_UNDOC_RELATIONS = YES 1.1303 + 1.1304 +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 1.1305 +# available from the path. This tool is part of Graphviz, a graph visualization 1.1306 +# toolkit from AT&T and Lucent Bell Labs. The other options in this section 1.1307 +# have no effect if this option is set to NO (the default) 1.1308 + 1.1309 +HAVE_DOT = NO 1.1310 + 1.1311 +# By default doxygen will write a font called FreeSans.ttf to the output 1.1312 +# directory and reference it in all dot files that doxygen generates. This 1.1313 +# font does not include all possible unicode characters however, so when you need 1.1314 +# these (or just want a differently looking font) you can specify the font name 1.1315 +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, 1.1316 +# which can be done by putting it in a standard location or by setting the 1.1317 +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory 1.1318 +# containing the font. 1.1319 + 1.1320 +DOT_FONTNAME = FreeSans 1.1321 + 1.1322 +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. 1.1323 +# The default size is 10pt. 1.1324 + 1.1325 +DOT_FONTSIZE = 10 1.1326 + 1.1327 +# By default doxygen will tell dot to use the output directory to look for the 1.1328 +# FreeSans.ttf font (which doxygen will put there itself). If you specify a 1.1329 +# different font using DOT_FONTNAME you can set the path where dot 1.1330 +# can find it using this tag. 1.1331 + 1.1332 +DOT_FONTPATH = 1.1333 + 1.1334 +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 1.1335 +# will generate a graph for each documented class showing the direct and 1.1336 +# indirect inheritance relations. Setting this tag to YES will force the 1.1337 +# the CLASS_DIAGRAMS tag to NO. 1.1338 + 1.1339 +CLASS_GRAPH = YES 1.1340 + 1.1341 +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 1.1342 +# will generate a graph for each documented class showing the direct and 1.1343 +# indirect implementation dependencies (inheritance, containment, and 1.1344 +# class references variables) of the class with other documented classes. 1.1345 + 1.1346 +COLLABORATION_GRAPH = YES 1.1347 + 1.1348 +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 1.1349 +# will generate a graph for groups, showing the direct groups dependencies 1.1350 + 1.1351 +GROUP_GRAPHS = YES 1.1352 + 1.1353 +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 1.1354 +# collaboration diagrams in a style similar to the OMG's Unified Modeling 1.1355 +# Language. 1.1356 + 1.1357 +UML_LOOK = NO 1.1358 + 1.1359 +# If set to YES, the inheritance and collaboration graphs will show the 1.1360 +# relations between templates and their instances. 1.1361 + 1.1362 +TEMPLATE_RELATIONS = NO 1.1363 + 1.1364 +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 1.1365 +# tags are set to YES then doxygen will generate a graph for each documented 1.1366 +# file showing the direct and indirect include dependencies of the file with 1.1367 +# other documented files. 1.1368 + 1.1369 +INCLUDE_GRAPH = YES 1.1370 + 1.1371 +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 1.1372 +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 1.1373 +# documented header file showing the documented files that directly or 1.1374 +# indirectly include this file. 1.1375 + 1.1376 +INCLUDED_BY_GRAPH = YES 1.1377 + 1.1378 +# If the CALL_GRAPH and HAVE_DOT options are set to YES then 1.1379 +# doxygen will generate a call dependency graph for every global function 1.1380 +# or class method. Note that enabling this option will significantly increase 1.1381 +# the time of a run. So in most cases it will be better to enable call graphs 1.1382 +# for selected functions only using the \callgraph command. 1.1383 + 1.1384 +CALL_GRAPH = NO 1.1385 + 1.1386 +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then 1.1387 +# doxygen will generate a caller dependency graph for every global function 1.1388 +# or class method. Note that enabling this option will significantly increase 1.1389 +# the time of a run. So in most cases it will be better to enable caller 1.1390 +# graphs for selected functions only using the \callergraph command. 1.1391 + 1.1392 +CALLER_GRAPH = NO 1.1393 + 1.1394 +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 1.1395 +# will graphical hierarchy of all classes instead of a textual one. 1.1396 + 1.1397 +GRAPHICAL_HIERARCHY = YES 1.1398 + 1.1399 +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 1.1400 +# then doxygen will show the dependencies a directory has on other directories 1.1401 +# in a graphical way. The dependency relations are determined by the #include 1.1402 +# relations between the files in the directories. 1.1403 + 1.1404 +DIRECTORY_GRAPH = YES 1.1405 + 1.1406 +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 1.1407 +# generated by dot. Possible values are png, jpg, or gif 1.1408 +# If left blank png will be used. 1.1409 + 1.1410 +DOT_IMAGE_FORMAT = png 1.1411 + 1.1412 +# The tag DOT_PATH can be used to specify the path where the dot tool can be 1.1413 +# found. If left blank, it is assumed the dot tool can be found in the path. 1.1414 + 1.1415 +DOT_PATH = 1.1416 + 1.1417 +# The DOTFILE_DIRS tag can be used to specify one or more directories that 1.1418 +# contain dot files that are included in the documentation (see the 1.1419 +# \dotfile command). 1.1420 + 1.1421 +DOTFILE_DIRS = 1.1422 + 1.1423 +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 1.1424 +# nodes that will be shown in the graph. If the number of nodes in a graph 1.1425 +# becomes larger than this value, doxygen will truncate the graph, which is 1.1426 +# visualized by representing a node as a red box. Note that doxygen if the 1.1427 +# number of direct children of the root node in a graph is already larger than 1.1428 +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note 1.1429 +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. 1.1430 + 1.1431 +DOT_GRAPH_MAX_NODES = 50 1.1432 + 1.1433 +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 1.1434 +# graphs generated by dot. A depth value of 3 means that only nodes reachable 1.1435 +# from the root by following a path via at most 3 edges will be shown. Nodes 1.1436 +# that lay further from the root node will be omitted. Note that setting this 1.1437 +# option to 1 or 2 may greatly reduce the computation time needed for large 1.1438 +# code bases. Also note that the size of a graph can be further restricted by 1.1439 +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. 1.1440 + 1.1441 +MAX_DOT_GRAPH_DEPTH = 0 1.1442 + 1.1443 +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 1.1444 +# background. This is disabled by default, because dot on Windows does not 1.1445 +# seem to support this out of the box. Warning: Depending on the platform used, 1.1446 +# enabling this option may lead to badly anti-aliased labels on the edges of 1.1447 +# a graph (i.e. they become hard to read). 1.1448 + 1.1449 +DOT_TRANSPARENT = NO 1.1450 + 1.1451 +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 1.1452 +# files in one run (i.e. multiple -o and -T options on the command line). This 1.1453 +# makes dot run faster, but since only newer versions of dot (>1.8.10) 1.1454 +# support this, this feature is disabled by default. 1.1455 + 1.1456 +DOT_MULTI_TARGETS = NO 1.1457 + 1.1458 +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 1.1459 +# generate a legend page explaining the meaning of the various boxes and 1.1460 +# arrows in the dot generated graphs. 1.1461 + 1.1462 +GENERATE_LEGEND = YES 1.1463 + 1.1464 +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 1.1465 +# remove the intermediate dot files that are used to generate 1.1466 +# the various graphs. 1.1467 + 1.1468 +DOT_CLEANUP = YES 1.1469 + 1.1470 +#--------------------------------------------------------------------------- 1.1471 +# Configuration::additions related to the search engine 1.1472 +#--------------------------------------------------------------------------- 1.1473 + 1.1474 +# The SEARCHENGINE tag specifies whether or not a search engine should be 1.1475 +# used. If set to NO the values of all tags below this one will be ignored. 1.1476 + 1.1477 +SEARCHENGINE = NO